Security CCTV Wired Network IP Camera IS-IP200

Specifications:

• Sensor: 1/3 inch CMOS, Minimum illumination 1 Lux
• Auto Iris: DC drive (NOT SUPPORTED now)
• Video Compression: H.264 Main Profile@Level 3
• Video Resolution Adjustable by IE and SDK: 1600 x 12001280x960,1280 x 720, 800 x 600
• Video Parameters Adjustable by IE and SDK: Brightness, hue, contrast, saturation and image quality
• Streaming Format: Video Streaming or Audio &Video composite Streaming
• Video Frame Rate Adjustable by IE and SDK: 1600 x 1200 115 frames/second 1280 x 960 115 frames/second 1280 x 720 115 frames/second 800 x 600 115 frames/second
• Video Compression Bit Rate Adjustable by IE and SDK: 16Kbit/-S8Mbit/S 
• Audio Input: 1channel,linear input, Input Impedance:1KOhms
• Audio Compression: G.726
• Audio Output: 1channel, linear output
• Image Encrypting: Digital watermarking ,AES Encrypt (not supported now)
• Local Recording: SD card recording and snapshot Support IP-San storage (no need PC storage server) not supported now
• Supported Protocols: TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP, Ipsec, UpnP, RTP, RTCP
• System Interface: 10Base-T/100Base-TX Ethernet port WiFi(802.11b/g) WiFi interface
• Alarm Input: 1channel on/off input, support NO (open) or NC (closed) RFID technology,link with wireless detectors
• Alarm Output: 1 channel on/off output, 120VAC 1A/24VDC 1A
• Power Supply: DC 12V 1A 
• Power Consumption: 6W Max
• Work Temperature: 10-55 ℃ 
• Storage Temperature: -20-70 ℃ 
• Work Humidity: 10-85%

Features:

• It has High-performance Multimedia Processor, SOC single-chip, high speed video frequency processor with built-in ARM9+DSP
• High-sensitivity and high signal-to-noise ratio (SNR)
• The Optimized H.264 Main Profile@Level 3 compression algorithm is better to satisfy the transmission of High Definition video at low network bandwidth
• Max resolution is 16001200 real-time encoding
• It can support 10 users to visit at the same time
• Built-in Web Sever to realize remote surveillance, controlling and setting via IE
• It can support 802.11b/g wireless network
• It supports upgrade by remote control
• It supports local or network storage. It is built-in SD slot. And it was integrated several network storage protocols
• It supports privacy protection mode, we have different way to control the camera to open the privacy protection or not. When the privacy protection open, the remote surveillance and recording will be closed. 11. It supports dynamic IP address, LAN, Internet (ADSL and Cable Modem)
• It supports bi-directional real time transmission of audio and broadcast
• It has network self-adapting technology to adjust video frame rate automatically according to the network bandwidth
• It provides video loss, motion detection and sensor alarm functio
• It provides RS485/RS232 serial port and built-in several decoding protocols. Also it supports transparent protocols
• Auto-retrieve function and auto-connection network

Details:

• It can support 802.11b/g wireless network

• Max resolution is 16001200 real-time encoding

How to Set Up IP Security Cameras:

• Mount the camera (screw it in place or use the attachment that came in the box) in a location close to a power outlet
• Install a network cable to the location of your mounted camera. One end of the network cable is plugged into a port on the back of the wireless router
• Plug the network cable into the camera and insert the power cable prong into the outlet
• Insert the CD that came bundled with your camera and install the security camera software and driver. This software suite is the central hub on the camera's viewing and recording. You will have access to numerous controls and features

Package Included:

• 1 x 2.0 mega pixel IP Camera