Portable Professional Opening Tools Set for iPhone 4 4S

Specifications:

• These pry Iphone Opening Tools are the same used by professional technicians to open up your iPhone  4 4S
• A good DIY toolkit for repairing digital products
• Open the iPhone faceplate without scratching it with this Iphone Opening Tool (Recommanded to get a technician or Professionals)
• Cross hair screw driver specially designed to work with iPhone, iPhone 4 4S Touch housing repair works
• This is a non-OEM product
• Compatible with: iPhone  4 4S
• Size: 117 x 15mm/4.6 x 0.6in(L x Dia.)

Details:

• This disassemble Iphone Opening Tool will allow you to open the phone cover easily and without damage

• A good DIY Iphone Opening Tool for repairing digital products

• This Best Iphone Tools set will make your life more convenient

How to Open iPhone:

• Lay out your clean cloth on a table or other flat surface. This will be your workspace. A clean cloth will prevent smaller pieces from becoming soiled, which can hinder future operation of your iPhone
• Find the black plastic antenna cover on the back of your iPhone. Open a small blade on your pocket knife and begin to pry open the black plastic. Work from left to right along the bottom of your iPhone. The iPhone uses two snapping points along the bottom of this plastic to lock in the antenna cover. Loosen these snaps and remove the black plastic cover. Set the black plastic piece aside
• Loosen the screws that are revealed. These secure the larger gray metal backing on the iPhone. Set these screws aside after they have been removed
• Remove the gray metal backing from the iPhone. This will take some force, but be careful not to break smaller pieces in your iPhone. Use your Swiss Army knife to pry the gray metal backing away in the same manner as Step 2. Alternatively, you can use a small suction cup on the front of your iPhone to make it easier to separate the front components from the back cover

How to Change the SIM Card in an iPhone 4:

If your iPhone 4's SIM card breaks, you must replace it with a new card if you want to use your phone. AT&T sells SIM cards you can activate through its customer service department, then install in your phone. The only times you should replace your SIM card are when it is physically broken, or when you get constant errors while trying to view information on the phone that is stored on the SIM

• Extend one side of the paperclip so it sticks out
• Use the open side of the paperclip to press the small indentation on the SIM card tray on the right side of the phone. The card tray will pop out
• Remove the SIM card from the tray and place the new one in the tray
• Push the tray back into the phone until it clicks in place

Package Included:

• 2 x Plastic Opening Tools
• 2 x Screwdrivers