USB 2.0 Data Sync Charger Cable for iPhone 4 4S 3G 3GS iPod iPad

• The USB cable for iPhone is in simple design and you can get good mood with it

• Plugs over the USB cable for iPhone are great and you can use them to connect the phone and the computer

• Being white, the USB cable for iPhone can perfectly match with iPhone

• USB data sync cable is able to offer you good information transfer

• Small size of the USB 2.0 data cable can be very convenient for you to carry

• The USB cable for iPhone is a must for iPhone users
• Though it is not an OEM product, you can get the equivalent service with it
• This is a non-OEM product
• Compatible with: iPhone/iPhone 3G
• Cable Length: 70cm/27.6in
• Color: White

USB Charging & Data Transfer:



It seems that you can't go anywhere without hearing about the illustrious USB cable. Nearly every electronic device since 1996 has one, or can connect to one. USB ports and cables can serve many functions, including data transfer and electronic charging

USB Overview:

• The Universal Serial Bus, or USB, is a format used to connect a device, such as a digital camera, to a host device, such as acomputer. It is recognized as the standard connection method used by electronic devices andcomputers

USB Charging:

• Manyelectronicscan use the USB connection as a charging source. Everything from MP3 music players to cell phones can be charged when connected to a host device like a computer, or a specially designed AC plug that connects directly to a power outlet. When connected to a computer, the USB draws a small amount of power and converts it to a charge for your device.Blocked Devices
• Many electronic devices have a built-in function that permits charging only when connected to certain products, often produced by the same company. This is to ensure that you are locked in to using the company's products

USB Data Transfer:

• Most devices such as MP3 players and external hard drives require that you have a wired connection to the host device in order to transfer information between the two. The preferred and most widely used method to connect is via a USB cable

Benefits:

• Having a direct connection can provide a rapid exchange of data between two devices. Many devices, such as an Apple iPod, can be set up to automatically transfer data when connected to your computer. When transferring data between two computers, a USB connection offers a much simpler solution than prior standards, such as burning data from one computer to a disc, then loading the disc into the second computer

How to Repair a USB Cable?

Repairing damaged USB cables is often accomplished through the replacement of the cable. It is often more advisable to purchase a new cable, as repairing any damage can be more expensive than a new cable. If you decide to repair your cable, you will need patience, a new connector end, and in most cases, a soldering gun. The process can be lengthy, but if you desire to keep your existing USB cable, you can make repairs

Instructions:

• Disconnect the damaged end of the USB cable. Some cables have USB ends that plug on to the ends of the USB cord and can be easily pulled off. Most damaged USB cable ends will need to be cut off with a wire cutter
• Purchase a new USB connector end. These can be purchased from electronic and computer retailers. Most connector ends come with a connector that has a 1- to 2-inch length of USB cable attached to it. If your USB end plugs into your existing cable, you will need to purchase that type of USB end, which is also easily found at electronic and computer retailers
• Plug in your connector if your USB accepts these types of ends. Once plugged in, test the cord to make sure it is working. If your USB cable does not accept plug-in connectors, cut a small opening in the hard plastic of the cable side of your connector to allow about 1 cm of the wires to be visible. There will be a red and black set of wires. You may need to use a wire stripper to remove any remaining plastic so that the metal of the wires are visible
• Turn on your soldering gun and allow it to heat up. Press the soldering gun to the exposed metal wires of your old cable and allow the head to lightly melt each wire's tip. Do the same to the wires in your new connector
• Quickly press both ends together. The red wires from the old cable should be attached to the red wires from the new connector end and the same goes for the black set of wires.They will almost instantly be bonded as soldering cools very quickly. It does not matter in which order you connect the wires as long as you connect red wires to red wires and black wires to black wires
• Trim off any excess hard plastic with a hobby razor knife and cover the mended area with black electrical tape

• 1 x Data Cable