Water Single Handle Rotary Copper Kitchen Faucet

Specifications:

• Adopt advanced electroplated handling to ensure the color uniformity, excellent corrosion resistance, bright surface gloss
• The copper kitchen faucet is engineered to look beautiful and function flawlessly
• Copper kitchen faucet is applied to hard water and is not impacted by gravel and sand
• Copper kitchen faucet is fashionable enough to make your home look modern
• The drinking water faucet adopts superior copper using gravity die-casting manufacturing
• Offering convenience, quality and style, this kitchen faucet brings sleek design continuity to your home
• The valve of this single hole faucet is made of hardness material and comfortable light
• Lustrous surface of the kitchen faucet, and as new even if used for a long time
• Material: Copper
• Color: Silver
• Total Height: 28cm/11.0in
• Spout Height: 26cm/10.2in

Details:

• The kitchen faucet can save water and energy. The copper kitchen faucet is engineered to look beautiful and function flawlessly

• Enjoy your washing with the kitchen faucet. Copper kitchen faucet is applied to hard water and is not impacted by gravel and sand

• High quality copper will give you a sense of texture. Copper kitchen faucet is fashionable enough to make your home look modern

• Adopt advanced electroplated handling to ensure the color uniformity, excellent corrosion resistance, bright surface gloss

• Offering convenience, quality and style, this kitchen faucet brings sleek design continuity to your home

General Faucet Installation Instruction:

Step 1: Position the Faucet

Step 2: Attach the Water Supply Tubes

Step 3: Connect the Faucet Lift Rod

Step 4: Flush the Faucet

Tools You Need for Installation:

• Adjustable wrench
• Tape
• Screwdriver
• Flashlight

Cleaning Methods:

• Cleaning Surface: Use cleaning agents to clean the dirt regularly. The water faucet should be rinsed with clean water and wipe it with a soft cotton cloth to keep surface clean before scrub the faucet. Do not wipe the faucet with abrasive cleaners, hard cloth, paper towels, wire ball and acidic or coarse material
• Cleaning Filter: Remove the air bubble and remove the filter. Then scrub the filter with a toothbrush or small brush under the tap

How to Clean a Faucet Head?

Cleaning a Shower Faucet Head:

• Place masking tape around the end of the shower arm that meets the wall and place another strip just above the shower head. This will prevent the wrench from scratching the shower arm
• Use a pipe wrench to hold the shower arm in place where it meets the wall. Unscrew the shower head with a second wrench
• Twist the shower head with your hand the rest of the way after loosening it up with the wrench. Remove the shower head from the shower arm
• Disassemble the shower head. The aerator is the hole-filled piece where the water comes out. Remove the aerator from the shower head by twisting or gently prying it off
• Fill a bowl with white vinegar, enough to submerge the shower head and all of its pieces. Allow the shower head to soak for at least 15 minutes, longer if needed
• Brush off all mineral deposits and gunk with a toothbrush. Poke the holes of the shower head with a toothpick to get rid of the gunk inside the holes. Place the pieces back together and twist back onto your shower arm

Cleaning the Aerator on a Sink Faucet Head:

• Remove the aerator by unscrewing it from beneath the faucet head. The aerator, round with a screen on it, mixes water and air to give the water an even flow
• Place the aerator in a cup. Add enough white vinegar to submerge the aerator. Let it set for 15 minutes
• Use an old toothbrush to scrub the aerator to remove mineral deposits and other gunk that may be present
• Use a toothpick or safety pin to remove gunk from the screen and vents. The aerator is full of small holes and vents on both sides, and these holes get plugged with mineral deposits. The vinegar should remove most of the deposits, but some scrubbing may be necessary
• Rinse the aerator and screw it back on to the faucet

How to Fix a Shower Faucet:

• Shut off the water supply to the shower. If the shower does not have a cut-off valve for that particular fixture, you will need to shut off the water supply to the entire house
• Open the faucets and allow the water to completely drain from the pipes. This will reduce or eliminate the chances of water splashing or pouring out while the repairs are being made
• Locate the screw on the faucet handle. Sometimes a clear or decorative cover has been placed over the screw housing. Use a flat-head screwdriver to gently pry this off
• Using the appropriate screwdriver, loosen the screw and remove the faucet handle
• Most leaks are caused by worn out or damaged rubber washers. If this is the case with your shower faucet, all that is needed is to replace the worn out or damaged washer with a new one
• If the washer does not need replacing, check to see if the faucet part itself needs to be tightened. If so, use the adjustable wrench to tighten the faucet
• Replace the handle, turn the water back on, and check to see if the leak has stopped. If it hasn't, make sure the washer is the right size, or try to tighten the faucet a little more
• If the faucet is broken, follow Steps 1-3, but completely remove all parts of the shower faucet. Take the parts to a store that sells plumbing supplies so that you will be sure to buy the correct replacement parts
• Install the new faucet. If there are no instructions included with the replacement parts, simply install the shower faucet where the old one was. The screw holes will already be there, and it will simply be a matter of fitting each part where it belongs, and attaching them firmly
• After the new faucet has been installed, follow Step 7

Package Included:

• 1 x Kitchen Faucet