Customers Also Bought
- Input Signal Format: MP3, WMA, OGG, WAV, AVI, WMV, SMV, BMP, JPG, GIF, TXT, HTML etc.
- Horizontal Resolution: 800 Pixel
- Vertical Resolution: 600 Pixel
- Screen Ratio: 4:3
Projection High Jump: 0.3-5M
- Brightness: 30 Lumens
- Distortion Degree: ≤ ±3%
- Angle of Projection: 30 degree
- Screen Size: 7-112"
- LED Life: 30000 hours
- Color Temperature: >6500K
- Video Input: CVBS,NTSC / PAL
- Audio Input: 1.2W
- LED Power: 12W
- R/S: 30dB
- Working Temperature: 0-40°C
- Working Humidity: 20-80%
- Storage Temperature: -20-60°C
- Storage Humidity: 20-80%
- Projection Distance: 0.2-5m
- Power: 15W
- Built-MP5, 2G RAM, USB data interface ,1-8G TF extension
- Connect any video audio output device, such as MP3/MP4, PSP, PMP, DV, DVD, mobile phones, TVs, computers, etc.
- Support RMVB, MP4, 3GP, MKV, WMA, WMV, etc.
- This mini LED projector is designed for table-top use or can be mounted on the ceiling for classrooms and meeting rooms
- The mini LED projector brings a new level of flexibility to your High-Definition home theater/multi-media experience
- This portable LED projector is great for home theater system and business presentation, high brightness and contrast to make the fantastic display
- The mini LED projector is easy to use and it provides portable big screen fun when connected to game consoles, computers, video players and even hand-held devices
- You could turn any room into a movie theater or giant game room with this high definition projector
How to Connect a Computer to an Overhead Video Projector:
- Connecting a computer to an overhead projector is easy as long as you have the right cords and drivers on your computer. Whether you have a Mac or a PC, you will need a few basic tools, knowledge of your operating system, and, sometimes, a little patience while you work out the kinks. Once you connect your computer to your projector, you can watch movies, show presentations, and work using the larger projector screen
- Identify the type of ports available on your computer. Plug the projector cable into the appropriate port of your computer. For example, some computers have S-video ports, which enable a direct connection between the S-video connection on a projector and the S-video connection on your computer. Computers may also have VGA ports, which are standard for connecting computer monitors, as well as audio/video (A/V) ports, which would enable you to connect your computer to A/V ports on a projector. You may need a cable adapter to adapt the projector cord to your computer port
- Turn on the projector
- Power on your computer
- Install the projector drivers. With later-model computers, the drivers will install automatically. You may see a notification pop up in the bottom right of your computer monitor to alert you that your computer has detected new hardware and is installing the appropriate drivers. If the drivers do not automatically install, you may need to download them or insert an installation disk that may have come with the projector
- Open the Start menu from the Start menu icon, which is generally located at its default position at the bottom left of the screen
- Scroll to the Control Panel option on the right-most tool bar
- Double-click the Control Panel icon to open the Control Panel
- Click on the Appearance and Personalization folder
- Click on the Display folder
- Click on "Connect to a projector" on the left panel
- Choose your connection option. "Duplicate" means that the images that are on your PC monitor will display on your projector at the same time. "Extend" means that the projector will be an extension of your PC monitor, as if your monitor were wider. "Projector only" means images will only display on the projector
How to Paint a Projector Screen?
To paint your own projector screen, you will need patience, a wall dedicated to your project and some special paint. This is not a project with which you should try to take shortcuts nor should you just jump into. It takes planning and preparation.
I will take you through the basic steps of planning, layout, preparing the surface for and painting a white projection screen for a home-theater projector. I am emphasizing white here since it creates a screen for a projector that produces 3,500 lumens or less. For projectors that produce more than 3,500 lumens, use gray paint. If you are unsure of the lumens produced by your projector, refer to the projector's owner's manual or contact the manufacturer.
Planning and Layout:
- Look around the room and find a suitable wall to paint the projector screen on. Be sure you have enough room for the screen and at least two additional inches on all sides for the black-tape border.
- After selecting the wall, remove everything from the wall.
- Your projector should already be mounted and ready for use. Turn on the projector to determine the location and screen size. A general rule for an HDTV-compliant projector is that the viewing distance be around 1.5 times the screen diagonal. So if your couch is 12 feet away from the wall, an 8-foot-diagonal screen is a good start.
- With the projector on, mark the corners of the illuminated area with a pencil. Cycle through the channels of your cable or satellite box slowly until you find the largest high-definition image. Mark the corners of this new illuminated area with a pencil on the wall. Sometimes there are variations in the dimensions of the illuminated area from channel to channel. Marking the largest illuminated area ensures your picture will always be contained with the borders of the screen. After marking the corners of the screen, turn off the projector.
- Carefully align the straightedge with the pencil marks for the largest illuminated area. It is best to have help with this, so that you can keep the straightedge level. Use a pencil to join the lines to form the border of the screen.
Preparing the Wall:
- Use painter's tape to create a border that will not be covered up during the preparation of the wall. Align the edge of the tape with the pencil lines on the wall. Take your time; do not rush through this process.
- Make the room as dark as possible. Then turn on a flashlight and hold it at a shallow angle to the wall so the light skims the surface. Inspect the entire area to be painted for raised areas or other imperfections. Mark these areas with a pencil to make them easier to find later.
- After all the imperfections have been identified, use a putty knife, sandpaper and sheet rock mud to repair these areas. The flatter and smoother the surface of the area to be painted, the better the end result will be. If there are very large dips in the wall, you may have to use a trowel and sheet rock mud to make the surface as even as possible. If you do not have any areas to repair, then skip ahead to step 5.
- Once the screen area has been repaired, go over the entire area again with fine-grit sandpaper to ensure that the entire area is smooth and free of any raised areas.
- Remove any excess dust from the wall by using a clean dry cloth and a wet-dry vac.
- If the wall is a dark color, apply two coats of white primer to cover up the existing color on the wall. If the wall is already white, skip to step 7.
- Apply the screen-paint primer to the screen area. Some manufacturers suggest two coats of primer. Refer to the manufacturer's instructions for best results.
Completing the Screen Area:
- After the primer has dried, stir the screen paint's top coat. Be sure to turn the can upside down and shake it vigorously for 2 minutes. Then apply the paint to the wall according to the manufacturer's instructions.
- Remove the painter's tape and allow the paint to dry. Refer to the manufacturer's instructions for suggested drying time.
- Use 48mm black tape to form a border around the screen and to increase its contrast. The tape available from Screen-paint Supply looks like black velvet and adds an extra dimension to the screen.
- You can use also use wood molding for a border instead of the black tape. However, using molding is more time consuming and labor intensive, as you will have to prepare and paint the molding before installing it.
- The screen is now complete. Depending on the paint used, it may take several days for the paint to completely dry and provide the best possible picture. I do recommend the two-part paint system from Screen Paint Supply. But there are other, cheaper alternatives like Behr's "SilverScreen" color (Color Chip: 770E-2) available at Home Depot. The basic steps in this article are the same regardless of which screen paint you choose.
- 1 x iCube MP5 Mini LED Projector
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 497.17||USD$ 488.43||USD$ 479.69||USD$ 468.03|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.