2m 40 LED White Light Christmas LED String Light (2 or 3 x AA Batteries)

Features:

• Optional bending, give full play to your imagination
• Small size,various colors for you
• High brightness,low consumption
• LED wick, high-quality and long life
• Adopt full enclosed waterproof design

Details:

• The Christmas LED string light features optional bending, give full play to your imagination

• The white LED string light is powered by 2 AA or 3 AA batteries, easy to use

• High quality material makes the Christmas LED string light durable for long time use

How to Replace a LED Christmas Light:



LED lights are more energy efficient light solutions for holiday decorations as they require less power and produce a more focused, direct light when compared to standard incandescent strings. Many people are making the switch from standard Christmas lights to LED lights as the available technology to produce them gets better and the cost is lower, but it's surprising to find that LED bulbs can have problems that mimic their incandescent counterparts. Light strings have been observed to fail about three bulbs per week, so it's important to pick up a replacement string of lights when buying LEDs

Replacing a Bulb

• Plug in the LED lights to identify any low light emitting or dark bulbs. Place a small length of string or a twist tie around the wire near the bulb to help in finding it once the string is unplugged.
• Unplug the lights. Pull out the faulty bulbs by gently grasping them and pulling them straight out away from the socket. Use care to not crush the bulb as you pull it.
• Replace with a new bulb from a different string, or from the replacement pack. Push the bulb into the socket gently, and it should snap into place.
• Plug in the string of lights to ensure that the replacement bulb is glowing and that the connection is good. Remove the marker string from the wires.

Replacing a Fuse

• If the entire string of lights does not work, it's time to check the LED fuse. Locate the fuse box on the plug; it will be on the side of the plug and have a small door attached. Open the door using a small screwdriver or butter knife.
• Pull out the small burnt fuse and inspect the damage. Check under and around the fuse in the plug for melted plastic; in extreme power surges, fuses can fracture and cause damage to the housing of the plug. Do not use lights that have melted the casing of the fuse. Use care to avoid crushing the fuse, as fuses are made of glass.
• Snap a new fuse into the fuse compartment by pushing on it slightly with your fingertip. Close the fuse box.
• Plug the lights in to test the new fuse; if the string of lights do not light up when plugged in, check the fuse again to make sure it's making good contact

Tips & Warnings:

• LEDs produce much less heat than standard holiday lights, and use about 1/10th of the energy. The technology available for creating these lights is still improving.
• If the dim or burnt lights do not easily come out of their sockets, it's possible that the lights have been made to prevent replacing the bulbs. In these cases, bulb replacement would damage the light string, so it's best to discard these lights when the majority have gone out.

Package Included:

• 1 x LED String Light