62mm Rubber Triple-purpose Cameras Lens Hood

Specifications:

• The Triple-purpose Lens Hood is for use with any type of lens
• Triple-purpose Lens Hood provides protection from unwanted light flares and from accidental physical damage
• Triple-purpose Lens Hood provides the solution to the problems caused by sun glare, rain and wind-blown debris
• This triple-position rubber lens hood covers different focal lengths
• The rubber material is acid proof and temperature insensitive
• Thread Diameter: 62mm/2.44in(Dia.)
• Material: Rubber

Details:

• Triple-purpose Lens Hood is designed to prevent unwanted stray light from entering the lens

• The 62mm Lens Hood is also valuable in providing protection against knocks and damage and is an essential piece of kit for any photographer

• Triple-purpose Lens Hood allows handheld photography even in low-light situation

• This Triple-purpose Lens Hood is ideal for wedding, photojournalism and other event and location shooting

• The main function of the lens hood is to shade the lens from stray light, improving your contrast and image quality

How to Use Lens Hood in Studio:

• Remove the lens cap from the camera
• Attach the lens hood to the camera. Lens hoods attach by screwing into, clipping onto, or fitting over the outside of the lens
• Check the shadow of the lens hood. If direct light is passing into the lens, it will appear as a "lens flare". Adjust the lens hood to block direct light by twisting it on the lens
• Check the position of the lights, reflectors and subject. Using a lens hood is preferable in a studio situation in which the lights, reflectors, and subject are set up optimally, but light is still directly entering the lens and causing flares. If there is no better orientation for the studio lighting equipment or subject, a lens hood is the best choice to block excess, flaring light

Methods to Clean Mold on Camera Lens:

• Purchase a cleaning product. These include Clorox Germicidal Spray, Tilex Mildew Remover and 500 PSI Mask Scrub. You can use almost any product that removes mold on glasses or lenses. Read the warning label for the product you choose
• Rub the lens cloth over the camera lens. Remove any grime or dirt that is present. This will allow you to see the damage more clearly
• Dip one lens cloth in warm water. Squeeze out any surplus of water. Extra water can seep into the camera if not careful
• Wipe the lens with the damp cloth. Concentrate on the mold section and any small creases around the camera lens. This will move any remaining dirt
• Spray or pour a drop of cleaner on the second lens cloth. Polish the camera lens thoroughly. Cover ever part of the mold pores including around any creases
• Use the third lens cloth to wipe the moisture off. Towel it completely dry. Then store it in a safe, dry location

Package Included:

• 1 x 62mm Rubber Triple-purpose Lens Hood