LINTON 6100 Walkie Talkie Battery 7.4V 1200mAh

Specifications:

• This is a high capacity, compact lithium-ion rechargeable battery
• The lithium-ion replacement walkie talkie battery provides a long time duty cycle
• Lithium-ion batteries are longer lived than conventional batteries and do not require replacement as often
• This Lithium-ion replacement walkie talkie battery has internal circuit board with chips that allow it to communicate with the Walkie-talkie to monitor battery performance, output voltage and temperature
• Voltage: 7.4V
• Type: Li-ion
• Capacity: 1200mAh
• Color: Black
• Dimension: 92 x 53 x 12mm / 3.6 x 2.1 x 0.5in(L x W x H)

Details:

• This is a high capacity, compact lithium-ion rechargeable replacement walkie talkie battery

• The lithium-ion 1200mAh walkie talkie battery provides a long time duty cycle

• Made of high quality material, the 1200mAh walkie talkie battery is durable and reliable for long time use

• Compact design, easy and convenient to take the replacement walkie talkie battery with you

Benefits of Lithium Ion Batteries:

• Higher Energy Density - Research on lithium batteries' instability during charging led to a lithium battery using lithium ions. Lithium-ion proved safer and has an energy density that is nearly double that of a nickel-cadmium battery. Their energy density is also higher than other rechargeable batteries, meaning they provide a lot of energy for their weight and size. They are lighter and smaller because they are made from lithium, the lightest metal, and carbon. A lithium-ion battery has between 500 to 1,000 charge cycles. It also has a low self-discharge rate. This allows battery packs that power small electronics to be designed using only one cell instead of three. Current research suggests that future lithium-ion batteries have potential for even higher energy capacities
• Low Maintenance/Lengthy Charge Hold - Lithium-ion batteries are low-maintenance. No priming is necessary for a new battery. They retain their charge for a longer time than other rechargeable batteries. With lithium-ion batteries no memory effect occurs as in nickel cadmium rechargeable batteries. So, the user does not have to completely use up the battery before recharge. Their charge is retained even after a consumer stores the battery for months
• Environmentally Friendly - Lithium-ion batteries are currently considered one of the most "green" batteries. Relatively few toxic metals are used to manufacture li-ions. They are recyclable, as are most rechargeable batteries, provided the consumer deposits them at a suitable recycling spot. Lithium-ions also use organic solvents, such as ether, to suspend the lithium ions

4 Tips to Extend Your Lithium Battery Life:

• Battery Memory - When I first got my new cellphone, my friend recommended to fully drain the battery before recharging it. His reasoning was connected to the idea of battery memory. Allowing the battery to fully discharge then recharging to max, supposedly gives you the complete battery capacity. Otherwise, if you simply charged from the half way point to max battery capacity, the battery would treat the half way point as the empty point, thus cutting your battery capacity in half
• Battery Calibration - There are some benefits to fully discharging your lithium battery periodically, for laptops this can be especially important. If you start to notice your battery meter becoming more and more inaccurate, it may be time for some battery calibration. Allow your lithium battery completely drain, then charge until the battery is full again. This will calibrate your battery  giving you more accurate readings
• Consequences of Heat - Another enemy of lithium battery life is heat. If you were to leave your laptop plugged in and running for a year, you should expect the lithium battery capacity to be anywhere between 60% to 80% of it's original max capacity. This is why people that use their laptops as desktop replacements will notice greatly reduced battery life performance after one year of use. This issue can be resolved by removing the battery while using a corded power source
• Battery Storage - If you don't plan on using your lithium battery for prolonged periods of time, then you'll want to reduce the charge level to 40% and place the battery in the fridge (not freezer). Storing the battery at 100% charge level applies unnecessary stress and can cause internal corrosion. On the other hand, if the charge is too low, the battery can become permanently unusable, due to battery self discharge

Charging and discharging:

Diagram of the charging of a secondary cell battery

• During charging, the positive active material is oxidized, producing electrons, and the negative material is reduced, consuming electrons. These electrons constitute the current flow in the external circuit. The electrolyte may serve as a simple buffer for ion flow between the electrodes, as in lithium-ion and nickel-cadmium cells, or it may be an active participant in the electrochemical reaction, as in lead-acid cells.
• The energy used to charge rechargeable batteries usually comes from a battery charger using AC mains electricity. Chargers take from a few minutes (rapid chargers) to several hours to charge a battery. Most batteries are capable of being charged far faster than simple battery chargers are capable of; there are chargers that can charge consumer sizes of NiMH batteries in 15 minutes. Fast charges must have multiple ways of detecting full charge (voltage, temperature, etc.) to stop charging before onset of harmful overcharging.
• Rechargeable multi-cell batteries are susceptible to cell damage due to reverse charging if they are fully discharged. Fully integrated battery chargers that optimize the charging current are available.
• Attempting to recharge non-rechargeable batteries with unsuitable equipment may cause battery explosion.
• Flow batteries, used for specialised applications, are recharged by replacing the electrolyte liquid.
• Battery manufacturers' technical notes often refer to VPC; this is volts per cell, and refers to the individual secondary cells that make up the battery. For example, to charge a 12 V battery (containing 6 cells of 2 V each) at 2.3 VPC requires a voltage of 13.8 V across the battery's terminals.
• Non-rechargeable alkaline and zinc-carbon cells output 1.5V when new, but this voltage gradually drops with use. Most NiMH AA and AAA batteries rate their cells at 1.2 V, and can usually be used in equipment designed to use alkaline batteries up to an end-point of 0.9 to 1.2V.

Reverse charging:

• Subjecting a discharged cell to a current in the direction which tends to discharge it further, rather than charge it, is called reverse charging; this damages cells. Reverse charging can occur under a number of circumstances, the two most common being:
• When a battery or cell is connected to a charging circuit the wrong way round.
• When a battery made of several cells connected in series is deeply discharged.
• When one cell completely discharges ahead of the rest, the live cells will apply a reverse current to the discharged cell ("cell reversal"). This can happen even to a "weak" cell that is not fully discharged. If the battery drain current is high enough, the weak cell's internal resistance can experience a reverse voltage that is greater than the cell's remaining internal forward voltage. This results in the reversal of the weak cell's polarity while the current is flowing through the cells[3][4]. This can significantly shortens the life of the affected cell and therefore of the battery. The higher the discharge rate of the battery needs to be, the better matched the cells should be, both in kind of cell and state of charge. In some extreme cases, the reversed cell can begin to emit smoke or catch fire.
• In critical applications using Ni-Cad batteries, such as in aircraft, each cell is individually discharged by connecting a load clip across the terminals of each cell, thereby avoiding cell reversal, then charging the cells in series

Package Included:

• 1 x Walkie Talkie Battery