2 Port USB 2.0 Printer Scanner Switch Share 2 PC

Specifications:

• This manual switch lets you conveniently share printer and scanner among two PCs
• Sharing application facilitates easy and secured switch from one computer to another
• High quality rotary switch no power required
• Compliant with USB 2.0 specification 
• Female connectors with gold-plated contacts
• Fully shielded metal case with anti-skid feet
• Lets you share USB devices between two PCs or Macs
• Hot key functionality lets you use a keyboard to switch between computers
• Color: Blue
• Dimension: 110 x 90 x 30mm / 4.3 x 3.5 x 1.2in (L x W x H)

Details:

• Practical sharing switch with 2 port hub .This is 2 Port USB 2.0 Printer Scanner Switch Share 2 PC.Auto Printer Sharing Switch, you are able to share a USB device without continuous connect and disconnect cable between computers. This USB 2.0 Printer Sharing Switch lets you conveniently share printer and scanner among two PCs

• Each port owns respective button .Plug-and-play functionality makes installation a breeze. Setup is fast and easy, just plug-in the included USB cables to the switch and printer scanner and you are all set.It is great to have this USB Sharing Switch, Printer Sharing Switch can help to connect at most four computers to the scanner or printer at the same time

• PC port connector: USB type B receptacle. USB device port connector:USB type A receptacle .You can compare the sharing switch with coin to determine the size of the switch share

Size in Detail:

How to Connect a Printer to a Computer:

These instructions apply to connecting parallel port printers to PCs. The process for Macintosh serial printers and Mac and PC universal serial bus (USB) printers is very similar.

Instructions:

• Position your printer. If you have a laser printer, allow a few inches of space on all sides for ventilation. Ink-jet printers don't require ventilation
• Buy a bidirectional, IEEE 1284-compliant parallel printer cable
• Shut down the computer, but leave it plugged into the surge suppressor
• Compare the connectors at the opposite ends of the cable
• Attach the 25-pin end of the cable to the parallel, or printer, port on the computer. (The plug will go in only one way.)
• Tighten the hand screws securely
• Connect the other end of the cable into the printer's socket
• Latch the retaining clips (on most printer ports)
• Plug the power cord into the printer and into the surge suppressor
• Turn on the printer
• Install cartridges according to the printer manufacturer's instructions
• Turn on the computer: Install printer driver software according to the manufacturer's instructions
• Add the printer to the list of printers your computer recognizes. On a Macintosh, just select the new printer in the Chooser

Package Included:

• 1 x Sharing Switch