Night Vision Motion Detection HD Mini DVR with LCD

Specifications:

• Primary Use: Mini HD DVR with 2.5 Inch LCD Screen
• Screen: 2.5 Inch TFT LCD Screen
• Mode: Video Cam / Picture Camera / Playback
• Resolution: Video: 1280x720
• Recording Format: Video: AVI (H.264), Files Size: About 1GB / 15 minutes
• Frame Rate: 30 FPS
• Storage: SD/MMC card up to 64 GB
• Record Mode: Cycle
• Cycle Length: 2/5/15/ Min per file or OFF
• Motion Detection Recording: Yes
• Time/Date Stamp: Yes- ON/OFF
• LUX Rating: 0
• View Angle: 70 degrees
• Built-in Mic: Yes
• Frequency: 50/60 Hz
• Connector: USB 2.0 (file transfer/Charging), Mini HDMI
• Power Source: DC 5V
• Battery: 800 mAh
• Battery Run-time: up to 2 hours
• Dimension: 100 x 63 x 23mm/3.94 x 2.48 x 0.9in(L x W x H)

Features:

• This DVR Camera is very necessary for us to install a Motion Detection DVR Camera at the back of the car, especially for those green hand, because we can not know well of the distance, the little kids or objects behind the car
• This is a Night Vision Motion Detection HD Car Rear View Camera with LCD
• Mounting lamp instead of lighting facilities. With distance label
• This Rear View Car Camera is perfect solution to get rid of poor rear view visibility on your car, boat, trailer, camper, truck, or any vehicle that has no rear-view mirror or poor rear vision
• This Car Rear View Camera is your road eye for everything that occurs while you are driving

Details:

• Night Vision Motion Detection HD Mini DVR with LCD, the DVR can capture clear videos for owners who want to monitor their cars

• This Motion Detection DVR Camera is very necessary for us to install a camera at the back of the car, especially for those green hand, because we can not know well of the distance, the little kids or objects behind the car

• The high quality video & audio of this Motion Detection DVR Camera can be timely and strong evidence to address accident and distinguish responsibility

• When select this Motion Detect function, this Car Rear View Camera will be record automatically if there is an object movement

NOTE:

• Built-in microphone lets you record audio as well
• Perfect tool for capturing those under-table or casting couch actions

How to Install a Rear-View Camera in Your Car:

• Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
• Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
• Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
• Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
• Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
• Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
• Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

Package Included:

• 1 x Host
• 1 x Braket
• 1 x USB Cable
• 1 x Car-mounted Charger
• 1 x User Manual