8 Inch Portable Case Skin Cover With Mini Keyboard For Tablet PC - Protector Sheath

Specifications: 

• Kickstand design and closure to prop up your machine when required
• With keyboard by USB connect
• PC Skin Cover is made from high quality material
• PC Skin Cover is left right open type case design
• PC Skin Cover offers all round protection
• Portable Skin Cover is easily insert and remove
• Comfortable to hold
• Case Skin Cover is soft and durable
• With pen loop, water proof keyboard
• Keep safe and protected in style
• Anti-dust, impact protective and tear resistant
• Slim and Secure fit, intergrated keyboard and leather case 2 in 1
• Ultra high quality construction and switching
• It offers the ultimate protection against scratched, bumps and slips
• Cut outs allow access to all ports, switches, speakers and sensors
• OEM or universal packing
• Material: Premium Leather
• Color: black

Details:

• PC Skin Cover is made from high quality material. PC Skin Cover is left right open type case design

• Anti-dust, impact protective and tear resistant. Slim and Secure fit, intergrated keyboard and leather case 2 in 1

• It offers the ultimate protection against scratched, bumps and slips. Cut outs allow access to all ports, switches, speakers and sensors

How to Make a Computer Cover:

Dust and cat hair aren't good for computers - but why settle for generic plastic when you can have cowboys (or flowers or polka dots) instead?

Making the Cover

• Measure your computer: height (top of monitor to desk, including computer "box" if the monitor sits on one), depth (the widest part of the box or monitor, back-to-front), and width (the widest part of the box or monitor, side-to-side)
• Measure your keyboard (side-to-side and front-to-back)
• Double the side-to-side measurement for the keyboard (that is, if your keyboard is 16 inches by 6 inches, your fabric piece will be 32 inches by 6 inches, plus seam allowance)
• Add 5/8 inch to all sides of all pieces for seam and narrow-hem allowance
• Make a pattern from newspaper. Draw each piece using the measurements you've taken and cut it out; you'll use it to cut out the fabric. You should have six pieces: one top, four sides, and one keyboard piece
• Use the pattern pieces to calculate how much fabric you will need. Get the fabric, and preshrink it if necessary
• Pin the pattern to the fabric and cut out your cover
• Pin the four sides to the top, right sides together, and sew
• Bring the sides together, right sides together, and sew (with each seam, your amorphous mass of fabric will begin to assume the shape of a cube)
• Narrow-hem three sides
• Narrow-hem both short edges and one long edge of your keyboard piece
• Gather the unhemmed, long edge of the keyboard piece, pulling up to fit the unhemmed edge of the cube; tie off
• Pin the gathered edge of the keyboard piece to the unhemmed edge of the cube (right sides together) and sew

Narrow-Hemming

• Turn over 1/4 inch and press
• Turn over another 1/4 inch and press again
• Machine stitch

Gathering

• Turn your stitch length to long
• Sew (without backtacking) two parallel lines, 3/8 inch and 5/8 inch, in from the edge
• Tie off one end (take hold of either the spool or the bobbin threads, gently pull up until you see a loop; grasp the loop and pull so that spool and bobbin threads are on the same side; tie securely)
• Take hold of either the spool or the bobbin threads; pull gently with one hand while sliding fabric toward the tied-off end with the other
• Tie off when you've achieved the length you want

Package Included:

• 1 X 8 Inch Portable Case For Table PC
• 1 X Stylus Pen