-
-
Specifications:
- This kind of double-deck bed canopy brings an exotic allure to any room you desire
- The bed canopy will help to give your bedroom a glamorous touch and show your high life taste
- The bed canopy can keep you far from mosquitoes, flies and other annoying insects in summer
- Your family members will love waking up each morning with this soft and royal canopy tent
- You will have a quiet and safe sleeping with the canopy awning as room decoration
- Sweet dreams are assured as your slumber beneath this netting canopy all the year round
- Outer Material: Terylene
- Inner Material: Mesh
- Outer Color: Gold
- Inner Color: White
Details:

- This kind of double-deck bed canopy brings an exotic allure to any room you desire

- The bed canopy adds a touch of romance to the bedroom decor

- This lace princess bed mosquito canopy is fully functional not only for decoration purposes but also for protection usages

- The material is very soft to touch, yet extremely strong to resist tears and abrasions

- Your family members will love waking up each morning with this soft and royal canopy tent
Size in Detail:
Size
Suitable Bed (W x L)
Frame Diameter
inch
cm
inch
cm
1.5M
58.5 x 78.0
150 x 200
24.6
63
1.8M
70.2 x 78.0
180 x 200
24.6
63
2.0M
78.0 x 85.8
200 x 220
31.2
80
NOTE:- These dimensions are for reference only. Specific dimension varies from person to person
How to Install a Ceiling Canopy:

- Power down the circuit breaker. Remove the old ceiling canopy, if there is one, using a screwdriver to take out the screws. Gently remove the fixture without breaking the plaster
- Locate the wire nuts (if any) and remove with the screwdriver. Sometimes the ceiling box has two wires connecting it. Use the cutters to cut any wires that are not insulated
- Push back the insulation about a half-inch. Use wire strippers to bare the exposed wires
- Look inside the ceiling canopy box and confirm there is a stud. If not, install one using a power drill, bits and screws
- Screw the hickey into the stud and make its bottom parallel to the ceiling box. Locate the short nipple that is part of the new canopy ceiling unit. Screw the nipple into the bottom of the hickey
- Place the canopy ceiling unit on a work table and remove its chain. Screw the chain support to the short nipple you just put into the hickey. Take the locknut off of the chain support
- Fit the ceiling canopy unit over the box on the ceiling. The chain's threads should be visible. Determine that the chain support has the proper length by screwing a locknut onto it. It should hold the ceiling canopy in place. If not, insert extension nipples between the stud and hickey
- Remove the locknut and take the canopy off the chain support. Push the locknut over the chain and push the canopy on top of the chain. Interweave the wires through the chain and up to the chain's support
- Re-attach the chain to the support. Pull the ceiling box wires through the hickey and even them out. Cut off about six inches of the unit's wires. Push back about a half-inch of the insulation and twist the wire strands clockwise. Use the iron to solder the wires
- Connect the wires between the ceiling and the new canopy unit. Make sure black wires attach to black and white wires to white. Put wire nuts over the ends and push into the ceiling
- Bring the canopy over its chain. It should cover the ceiling box. Push a locknut over the chain and turn the chain clockwise. Supply energy to the new unit by turning the power on
How to Measure the Size for a Chandelier Canopy:

- Measure the ceiling opening with a tape measure. Most chandelier's are sold with a canopy that is designed to match the appearance of the chandelier. In some cases, this canopy will be too small to cover the mechanical structures and ceiling hole used to hold the chandelier. In particular, some chandeliers have motors operated by remote controls that allow a large chandelier to be lowered for bulb changes, maintenance and cleaning. These differences in mounting can make the generic canopy unworkable
- Measure the height of the mounting hardware as it projects down from the ceiling. This measurement will give you the height of the canopy necessary to cover the hardware
- Select a canopy with the width to cover the opening cut into the ceiling. The canopy must also be designed to work with the mounting structure. Canopies are available from 3 inches wide to over 7 inches wide and with depths that vary from 1 inch to 4 inches. Some canopies are sold with separate mounting pieces that can be used to modify generic mounting pieces
- Choose a larger canopy for aesthetic reasons if the fixture is quite large. In most cases, the canopy's function is to hide the mounting point and complement the fixture. The canopy should be the same finish and style as the chandelier. When a fixture is quite large, the wider or more massive canopy will look more appropriate. It is also common to add a ceiling medallion that will fit the canopy to extend the architectural detail of the mounting
Package Included:
- 1 x Canopy
Get DinoPoint™ by Writing reviews, Post Images, or Post Videos. The first five customers can get double points!
Madison
from ()
Bought this item on
12-17-2011- Other Thoughts: The bed canopy attains a charming home furnishing quality via a special technology.
Was this review helpful?
Rachel
from ()
Bought this item on
12-22-2011- Other Thoughts: The bed canopy can keep me far from mosquitoes, flies and other annoying insects especially in hot summer days.
Was this review helpful?
Megan
from ()
Bought this item on
12-20-2011- Other Thoughts: I will have a quiet and safe sleeping with the bed canopy.
Was this review helpful?
Hannah
from ()
Bought this item on
12-16-2011- Other Thoughts: The canopy tent fits my bed very well.
Was this review helpful?
Olivia
from ()
Bought this item on
12-19-2011- Other Thoughts: The canopy awning is durable and practical
Was this review helpful?
Maybe you are interested in:






























































































































