Penguin Shaped Infrared Hand Sensor Recordable Door Bell RD669

Usage:

• Used in home, office, hotel and other necessary places to remind or leave message for product has a magnetic circle that generates the magnet power, also you can use that to hang the device in the place, where you think that some one you want to remind/leave message may touch, like door handle, handrail, etc.
• Open the battery cover on the back, install 3 x AAA batteries. You could record your favorite sound by pressing till the button on the side of device printed REC, at this moment the light on facade is on, indicates the device is recording the maximum is 6 seconds. After 6 seconds, the light will automatically recording sound within 6 seconds, please loose the REC button after sound the sound should be recorded in a silent environment
• When some's hand is near the magnetic circle or in one some metal with magnetic circle, the device will make the recorded using in reminding people to not forget bringing the key while leaving room, leaving message for family, reminding taking medicines, hotel services leaving messages, etc.

How to Install the Wireless Doorbell:

• Determine the preferred location for your receiver unit. The receiver unit contains the chime and is best located someplace central in your home. Most receiver units simply mount directly on an AC outlet using the attached plug
• Install a new battery in the push button unit. You may need a flat head screwdriver to remove the cover of the unit. The screwdriver is normally inserted into a notch at either end of the unit. Use the screwdriver to gently pry the plastic cover away from the base
• Test the door push button prior to mounting the push button unit. This assures you the chime unit is functioning and allows you to gauge the volume at the selected location
• Adjust the transmitter frequency from the push button if the chime in the receiver unit does not sound. Remove the cover as described in Step 2 and locate the frequency settings
• Make additional adjustments, depending on your specific model, for volume and chime ring tone. Most models feature adjustable ring tones so you can discern which door's push button has been activated. These adjustments are made by removing the cover of the receiver unit. Adjust the chime volume and ring tone frequencies according to the labeled settings
• Mount the push button unit, or units, beside the desired doors. Some units have holes in the base for mounting screws. If so, you will need to remove the cover and use your screwdriver to drive the screws into the wall. Other units use a strong adhesive strip that allows for quick and easy mounting to vinyl or metal surfaces

Tips & Warnings:

• If over time the door chime fails to sound, or sounds intermittently, check the battery in the push button unit and make sure the receiver unit is still plugged into the wall outlet

Package Included:

• 1 x Door Bell