Customers Also Bought
- Wireless control, easy to install.
- Control Lights, Motors, Fans, electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances with voltage AC110~240V or DC0~28V.
- You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
- The receiver has farther working range with external extend antenna,about 2000 meters !
- Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
- One/several transmitters can control one/several receivers simultaneously.
- If you use two or more receivers in the same place, you can set them with different codes.
- Transmitting Frequency: 315MHz / 433MHz
- Model No.: S1T-DC09-ANT2 / S1T-DC12-ANT2 / S1T-DC24-ANT2
- Channel: 1 CH
- Control Mode: Toggle (Press -> On; Press again -> Off)
- Coding Type: Fixed code
- Coding Setting: By bonding pad encoded
- Power Supply (Operating Voltage): DC12V±1V (S1T-DC12-ANT2), DC9V±1V (S1T-DC09-ANT2), DC24V±1V (S1T-DC24-ANT2)
- Working Voltage Range of Relay: AC110~240V or DC0~28V
- PCB size: 68mm x 48mm x 20mm
- Case size: 75mm x 55mm x 30mm
- Maximum Working Current: 5A / each channel
- Model No.: CB-1
- Channel: 1 CH
- Remote Control Distance: 1000m / 3000ft (theoretically)
- Encode: Fixed code by Pins
- Unit size: 135mm x 42mm x 25mm
- Power Supply: 1 x 6F22-9V battery (Included, useful life 6-12 months)
Details：This 1CH rf remote control system operates in the 315/433MHz frequency, with voltage AC110~240V or DC0~28V.
It is great for hard to reach lights or other DC/AC electrical devices, remote distance can be 2000m theoretically.
Applications include gate remote control, motor remote control, garage door remote control, light remote control, etc.
External extend antenna:
- Frequency Range: 300~450MHz
- Impedance: 50Ω
- Antenna Length: 15cm
- Cable Length: 150cm
- Weight: 35g
- Anti-interference, waterproof, shielded wire set inside
- Magnetic stand design for easy to install
- 1 x Receiver: S1T-DC09-ANT2 / S1T-DC12-ANT2 / S1T-DC24-ANT2 (1 Channel / Toggle Control Mode)
- 1 x Transmitter: CB-1
- 1 x User manual
- Initial state: B, D = Normally Closed; D, K = Normally Open.
- Press button: Turn on relay (connect D and K, disconnect B and D)
- Press button again: Turn off relay (disconnect D and K, connect B and D)
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 18.57||USD$ 15.73||USD$ 12.89||USD$ 9.11|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.