1:30 Boys Kids Toy Electric Remote Control Tank

Specifications:

• Size: 22.0 x 10.0 x 10.0cm/8.7 x 3.9 x 3.9in(L x W x H)
• Material: Metal & Plastic & Electronic Accessories
• Tank Battery: 4.8V 400mA Battery
• Scale: 1:30
• Running Time: 15-20 Minutes
• Control Range: Approx. 50m

Features:

• Super Spin multiple channel remote controller of this electric tank is able to program
• This Toy Tank turret can shoot the plastic bullet and can rotate 320 degree 
• Full function Tank Model (Forward, Backward, Left Forward, Right Forward, Left Backward, Right Backward, Rotate)
• Remote Control Tank makes great gift for any Battle Tank enthusiast
• Its wheels drive gives maximum acceleration, speed and stopping power and a responsive steering system allows for wonderful cornering
• Made of high quality material, this Toy Tank enriches itself with strong stress preventing
• The best gift to show your special love to your kids
• Fully functional with multi-directional driving, large degree turret swivel and the barrel raises and lowers
• Easy to control as it can be operated with one hand while walking
• A very popular currently and vogue decorate for your family when placed
• Well satisfy your demand for several tanks fighting at the same time of combat

Details:

• With true tank design, you will feel very excited and wonderful while playing the tank toy

• The electric RC tank can be a good gift and seems honorable and generous

• The remote control tanks are provided all kinds of functions, including going forward, back off, turning right, left and rotating

• Great details has been given to the electric remote control tank, cool and fashionable

• The electric remote control tank is easy to control and packaged well

How to Make a Paper Army Tank?

• A paper airplane is nothing compared to this paper army tank. It's a great craft for kids and even for people who are just bored at the office. Finish it off with plastic soldiers for an afternoon full of imagination

Instructions

• Cut your paper so its 2 inches wide and 10 inches long. Keep the extra that you cut off because you'll use some of it on your tank
• Fold the top left corner over, like you would if you were book marking a page in a book. Unlike a bookmark, though, you should fold until the end of your corner reaches the end of the other side. Unfold this corner and notice the crease you created. Repeat this step for all the other corners. When you're done, you should have an "X" creased on the top and the bottom
• Collapse the sides of each "X" to create triangles. You should have one triangle on the top and one triangle on the bottom
• Grab the right corner of the top triangle. Fold that corner up to create a flap that touches the top of the triangle. Repeat with the left side
• Turn your paper around so the bottom triangle is now on top. Fold the right corner of that triangle over on top of the left corner. Create a flap similar to the other side, except this flap will be folded down instead of up. Repeat on the left side to create the shape of a diamond
• Bend your paper like a circle until both ends of the paper meet. The triangles should interlock together using the flaps that you just created. Lightly push down on the paper to create an oval. If you look at it, your paper will look similar to the shape of an army tank
• Add the finishing touch. Using the extra paper you cut off before, cut a rectangle that is 1 inch by 2 inches. Roll it up into a tube and insert it in the top of your army tank in place of the gun

How to Control an R/C Tank With a Laptop:

Playing with remote-controlled tanks is a rewarding pastime. Normally an R/C tank is controlled by broadcasting commands with a radio frequency remote. However, if you download an R/C remote program you can plug your remote into your laptop's audio port and control it directly from your laptop. This will give you the ability to use your laptop to control your tank or any other R/C vehicle. The only piece of extra equipment that you will need to purchase is a regular male to male audio plug

• Click on the Linux R/C program in the Resource section. Click on the save button, and save the file to your desktop
• Plug one end of the audio cable into the buddy/trainer port of your remote control, and the other end into the speaker port on your laptop
• Run your Linux emulator on your laptop. Type "$ tar jxvf ppm.tar.bz2" and then press "Enter." This will extract the file. Type "Run ppm.exe" and press "Enter"
• Drag the indicator on each of the eight channels displayed on the PPM program. An R/C tank will use two channels, one for each tread; other R/C vehicles will use more channels. Find out which of the 2 channels out of the 8 displayed control your treads. By dragging the channel indicator to the right it will increase the signal to the specified tank tread and control your tank

How to Paint Model Tanks:

When painting model tanks it's important to have a historically accurate image of a full-size tank to use as a painting guide. Some tanks have more leeway for accuracy than others. According to Painting Clinic, during World War II vehicles and tanks from Allies and enemies were manufactured in many factories throughout the war. Colors and details vary and tanks of the same design were not routinely painted alike. Tanks painted during non-wartime are often more precise. Painting model tanks accurately requires patience and time. Don't try to rush the painting or your results might suffer

• Purchase or find online a color image, preferably a photograph, of the actual tank your model represents. According to Painting Clinic, an important part of painting historical model vehicles is making sure the model matches, as close as possible, the real vehicle
• Cover your work area with newspapers. Place the assembled model on top the newspaper. Spray the model all over with household degreaser. Rinse the degreaser from the model with warm tap water and a sponge. Let the model dry for 12 hours
• Spray the model all over with black spray primer. Allow the primer to dry completely
• Use the appropriate enamel model paints to paint your tank. Enamel model paints are available at craft and hobby stores. Wait at least one hour between colors so one color is dry or nearly dry before applying a different hue. This prevents drips and paint bleeds. Use the photograph of the real tank as your guide in painting
• Use a fine-point permanent black marker instead of a brush if you don't possess a steady hand to ensure you have straight lines around things such as hatches and rivets. Don't try to cram on every detail of the real tank
• Brush the location for model decals with gloss varnish. Allow varnish to dry. According to Painting Clinic, this will reduce air bubbles from forming beneath the decal
• Hold the decal with tweezers into a bowl of water for 10-seconds. Set the decal on the newspaper for 30 seconds to rid it of excess water. Use the tweezers to apply the decal onto the model. Hold the decal onto the model with the end of a paintbrush, pulling the paper backing away with the tweezers. Decals can be purchased at model, craft, and hobby stores. According to Painting Clinic, decals are only good for around three years and then the adhesive and paper begin to weaken

Package Included:

• 1 x RC Tank
• 1 x Remote Controller
• 1 x Battery Pack for RC Tanks
• 1 x Charger for Battery Pack
• 1 x Plastic BBs Pack
• 1 x Remote Control Antenna
• 1 x User Manual
• 1 x Box