Customers Also Bought
- Clear, ultra thin and durable
- Protect your cell phone's LCD screen against dust and scratches
- S3370 LCD Screen Protector offers tough, durable, transparent surface while keeping the LCD screen clean
- Quickly and easily adhere directly to your screen
- S3370 LCD Screen Protector can reduce the eye strain caused by the LCD screen
- This is a non-OEM product
- Size: 46.3 x 82.5mm/1.8 x 3.2in(W x L)
- Compatible with: SAMSUNG S3370
- The surface is not textured like other screen protectors. SAMSUNG LCD Screen Protector can be removed without leaving any residue mark
- Non-adhesive backing, will not leave residue, S3370 LCD Screen Protector can be cleaned with water and used repeatedly
- Custom designed to fit your Samsung S3370 Corby 3G screen, quickly and easily adhere directly to the screen
- Clean the screen thoroughly
- Expose 1/2 inch of the screen guard, take care not to touch the adhesive side
- Align the exposed section with the edges of LCD screen. Make sure the screen guard has been placing straightly
- Peel off the mask with the provided sticker after application completed
How to Apply an LCD Screen Protector
By using an LCD screen protector, you can prevent expensive screen replacements due to scratches and accidental damage. It can also help reduce the glare on your screen. This type of protective film can be used on cell phones, cameras, desktop monitors, laptops, PDA and touch screens, just to name a few. Installation of this screen protector can be completed in a matter of minutes
- Wipe the dust and the dirt off the screen using a soft, clean cloth and then dampen your cloth with a little water and wipe your LCD screen clean; this will prevent bubbles from appearing on the protective film
- Wash your hands before handling the protective film. Dust and dirt particles are attracted to the film and could interfere with the film sticking to the LCD screen properly
- Measure small screen areas that you want to protect using a white piece of paper if your LCD screen protector is not precut. Place the sheet of paper on the screen, take a pencil and gently trace the screen area. Cut out the outline of the screen on paper and use this as your guide to cut your LCD screen protector
- Measure large screen areas that you want to protect using a measuring tape and measure all four sides of your LCD screen. Write down the measurements. Use your measuring tape as the guide when cutting the film to size using a razor blade or a box cutter
- Peel the protective film cover from the adhesive lining. Do not touch the back of the screen protector because doing this will leave fingerprints
- Apply the film to the screen with the silicone layer facing downward on the screen. Align the screen protector with the screen's edge and apply light pressure to the front side of the film as you place it into position
- Work your way across the screen from the top to the bottom. Do not leave any bubbles on the screen surface as you go. If you have any air bubbles, pull that area back and retry
How to Install a Screen Protector
Protecting a liquid crystal display on electronic equipment or a laptop is important ensure permanent damage does not occur to a delicate LCD. Installing protective film can be tricky because if the screen is not completely clean, dirt will be trapped beneath the screen protector. Additionally, if care is not taken to adhere the protector, it might not go on smoothly and without wrinkles
- Clean the LCD completely. Make sure there is no dust, dirt, grime or smudges on the screen before adhering the protector
- Cut the protector to fit the size of the screen
- Peel the protector back from its film slowly and carefully. After 1 inch of the protector has been peeled away, line up the top of the protector with the top of the screen
- Adhere the protector to the screen. Scrape with a credit card to ensure there are no air bubbles or wrinkles as you work down the screen
- 1 x LCD Screen Protector Film for SAMSUNG S3370
- 1 x Cleaning Cloth
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 1.95||USD$ 1.91||USD$ 1.88||USD$ 1.84||USD$ 1.81|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.