DCCH003-FE1 Digital Camera Battery Charger for SONY NP-FE1 DSC-T7 DSC-T7/B T7 DSC-T7/S

Specifications:

• Input Voltage: AC 100V~240V / DC 12~24V 50/60Hz Max 150mA
• Output Voltage: 4.2V / 8.4V
• Output Current: 600mA
• Size: Approx. 85 x 47 x 38mm/3.35 x 1.85 x 1.50in
• Compatible with: SONY NP-FE1, DSC-T7, DSC-T7/B, T7, DSC-T7/S
• 100% new high quality battery charger set
• Universal voltage 100V-240V fits anywhere in the world
• Quick charge with automatic constant current control prevents battery from overcharging, short circuit, and electronic shock
• Smart LED indicator shows charging status by turning from red to green when fully charged
• Perfect fitting and 100% satisfaction guaranteed
• The Battery Travel Charger can be also used as a travel charger which automatically adjusts to all voltages and frequencies in the US, Europe, Australia and UK(Charger cable is not included)

Details:

• Digital Camera Battery Charger for SONY NP-FE1 DSC-T7 DSC-T7/B T7 DSC-T7/S

• Two-pin-plug, This Digital Camera Battery Charger for your for SONY battery gives you quality and reliability

• These cables are for you to use, this high quality Battery Travel Charger has a smart LED indicator shows charging status by turning from red to green when fully charged. Slim and portable design, you can use the Battery Travel Charger to recharge your camera battery while driving 

How to Replace a Digital Camera Battery Charger:

• Not all chargers are universal; so have your camera's model number and make handy
• Check to see if your original battery charger is covered under warranty
• Know what type of batteries your digital camera uses: nickel metal hydride (NiMH), nickel cadmium (NiCD), lithium ion or lead-acid. Verify your new charger will work with that specific type
• Research third-party merchants for replacement parts at reduced prices. Most of these vendors carry battery chargers for an assortment of camera manufacturers
• Advertise your interest in replacing your digital camera battery charger on the Internet or in the classifieds of your local newspaper. Sites like craigslist.org or eBay.com are recommended sources because of their wide consumer appeal
• Visit online electronics stores for the suitable battery chargers

How to Fix Casio Camera Battery Charging Error:

• Insert the battery that came with the camera into the battery charger unit. Use the battery charger unit that came with the camera and verify that the polarity is correct. The plus and minus icons on the battery should match that on the charger. Plug the charger into a power outlet and allow 180 minutes for the battery to charge
• Look at the charge light on the charger. If the light is illuminated red, the battery is being charged. If it's off, the battery is charged. If the light is flashing red, there is a battery charging error
• Remove the battery from the charger if the light flashes red. Then remove the power cable and clean the contacts on both the battery and the charger. Wipe them with a soft cloth and try to charge the battery again
• Place the charger and battery in your pocket for 10 minutes if the ambient temperature is cold and the red light continues to flash. The charger may be too cold. Try to charge the battery again
• Move the charger and battery out of the sun and into the shade or into an air conditioned environment if the ambient temperature is warm. The charger may be overheating. Allow the charger to cool down and try to charge the battery again

Package Included:

• 1 x Battery Charger
• 1 x Car Charger Cable