Precision Telecom Maintenance Tools Screwdrivers Set PX 8902

Specifications:

• This telecom screwdrivers set has the most frequently used tools for telecom install and maintenance
• Telecom screwdrivers set is an absolute must for telecom and electrical technicians where protection from bodily harm is required
• The insulating material used is impact resistant and flame retardant
• Special design of telecom screwdrivers set makes inspection easier which adds to the overall safety
• Maintenance tools include the basic items needed for telecom installation and maintenance
• Size: 110 x 20mm/4.3 x 0.8in(L x Dia.)

Screwdriver Type:

• T4; T5; T6; T7; T8; T10; T15; T20
• 3.0(Tri-wing)/△
• 1.0; 1.3; 1.5; 2.0; 2.5; 4.0
• M2.6
• 1.0; 2.0; 2.5; 3.0; 3.5; 4.0(Slotted)
• 1.0
• 2.0
• Y0 3.0(Tri-wing)/△
• PH0; PH00; PH1; PH2(Cross Slot Phillips)
• Tweezer

Details:

• This is a Precision Electronics Interchangeable Screwdriver Set. The insulating material used is impact resistant and flame retardant

• This convenient telecom maintenance set will allow you to open the phone cover easily and without damage

• This tool set will make your life more convenient. Include the basic items needed for telecom installation and maintenance

• This telecom screwdrivers set has the most frequently used tools for telecom install and maintenance

• You can image the size of the tool according to the coin. Take this telecom maintenance set home immediately

How to Choose the Right Screwdriver:

• Match the screwdriver to the screw head
• Don't assume that all cross-head screws are for Phillips screwdrivers. A Phillips will slip out of a screw designed for a Pozidriv screwdriver, which has a slightly flatter tip
• Drive hex-head screws with nut drivers
• Do fine work, such as on eyeglasses and computer equipment, with a set of jewelers screwdrivers
• Find screwdrivers with contoured handles that are at least 5 inches long and that fit the shank tightly. Handles without finger grooves are the most comfortable
• Try an offset or a stubby screwdriver in close quarters where a normal screwdriver won't fit
• Get a ratcheting screwdriver or an electric screwdriver to prevent repetitive motion injuries
• Use a screwdriver that has the same blade tip width as the screw head and fits in the slot tightly
• Look for screwdrivers with black oxide tips, which improve control
• Use a screw holder or a magnetic screwdriver to start screws in awkward or hard-to-reach places

How to Use a Screwdriver:

Insert a Screw:

• Note the type of screw you are using and get the correct screwdriver for the job
• Place the screw in the correct position
• Insert the tip of the screwdriver into the head of the screw
• Press down firmly on the screw head by holding the handle of the screwdriver and applying pressure
• Turn the screwdriver to the right, or clockwise, until the screw is flush with the material you are working with or until the screw is secure

Remove a Screw:

• Get the correct screwdriver for the job by looking at the head of the screw you are about to remove
• Insert the tip of the screwdriver into the head of the screw
• Apply pressure to the screw by holding the handle of the screwdriver and pressing down firmly on the screw
• Turn the screwdriver to the left, or counter-clockwise, until the screw begins to turn
• Press down less firmly while continuing to turn the screwdriver until the screw is free. Only apply enough pressure to keep the screwdriver in place and turn the screw

How to Figure out Screwdriver Size:

• Check the package. Match your screw size with your screwdriver size. If you have the package in which your screws came in, look at the package for the size of screws you bought. You want to look at how long and thick the screw head slot is. You can then find a screwdriver that's the same size
• Look at the head of your screw. A Phillips blade will have a blunt tip and the screw slots will curve where they intersect. A Torx blade will have a star-shaped tip for screws in appliances and garden equipment. A square-drive screw head will not slip despite strong twisting
• Measure your standard blade screw head slot. You'll want to use a tape measure to determine how long the slot is and how wide it is. If you use a screwdriver that's too wide and too thick, you won't be able to fit your screwdriver in the slot. If you use a screwdriver that's too narrow and too thin, it will slip off easily
• Use a screwdriver with parallel sides for wooden screws
• Use special screwdrivers to install screws in awkward spaces. You should use a stubby screwdriver if your space is limited. Use grips for screws that are in deep holes

Package Included:

• 1 x Set of Precision Telecom Maintenance Tools Screwdrivers