8CH CCTV H.264 Network Surveillance 240FPS Security DVR 7008DA

Specifications:

• Compression: H.264
• Video Input/Output: 8 BNC/ 1 BNC, 1 VGA
• Audio Compression Method: 8kHz 16bit ADPCM
• Audio Input/Output: 8 RCA/ 1 RCA
• Alarm Type : Motion detection, sensor trigger, video loss, disk full, disk error
• Alarm Input/Output: 8-channel alarm input /1-channel alarm output
• Display: 1/4/8-channel switchable
• Display Resolution: (704x576)(PAL); D1 (720x480) (NTSC)
• Display Frame Rate: PAL 200fps@CIF NTSC 240fps@CIF
• Recording Resolution: PAL CIF(352x288) NTSC CIF(360x240)
• Recording Total Frame Rate: PAL 200fps@CIF NTSC 240fps@CIF
• Recording Mode: Start automatic continuous, timing video, motion detection, trigger alarm
• Video Packing Time: 15/30/45/60 minutes adjustable
• HDD: Support one SATA harddisk drive (maximum capacity is 1T)
• Network Protocol: Support DHCP, UDP, TCP/IP, DNS, DDNS, PPPOE and other protocols
• Network Functionality: Support IE browsing, real-time network monitor and network DVR parameter setting
• USB1.0 Interface: Support mouse operation
• USB2.0 Interface: Support mobile harddisk and USB disk backup and upgrade
• Playback Mode: Normal playback, fast forward playback, fast backward playback, manual single-frameslow motion
• Network Interface: One RJ45 10M/100M self-adaptive Ethernet port
• PTZ Control: Built-in RS-485 interface, support Pelco-D and Pelco-P protocol
• Backup Function: support USB disk backup, mobile harddisk backup, USB burner backup and network backup
• Power Adapter: DC 19V/2.1A
• Power Consumption: 15-20W (excluding harddisk)
• Operating Temperature: 0degree C to +50 degree C
• Operating Humidity: 10%-90%

Feature:

• Standard H.264 video compression format
• 16-bit true-color semi-transparent graphical menu interface, menu options tip
• Optimized four-channel simultaneous playback (single playback for eight-channel ones)
• A variety of backup (U disk, mobile harddisk, network)
• One USB2.0 for data backup, one USB1.1 for the mouse operation
• HDD Video Recorder with its Multi-functional operation, recording, playback, monitor, backup and network transmission can be realized at the same time
• Dual stream technology
• Security Digital Video Recorder Supports network to implement multi-screen real-time browsing, parameter setting, copy or playback
• Security Digital Video Recorder Supports phone monitoring
• Security Digital Video Recorder Supports event classification and precise time search and playback
• Defaulted parameter value fast recovery
• Flexible USB interface for mouse
• A variety of recording modes: manual, timing, movement and alarm recording

Details:

• HDD Video Recorder with its Multi-functional operation, recording, playback, monitor, backup and network transmission can be realized at the same time

• 16-bit true-color semi-transparent graphical menu interface, menu options tip

• Security Digital Video Recorder Supports network to implement multi-screen real-time browsing, parameter setting, copy or playback

• Security Digital Video Recorder Supports event classification and precise time search and playback

• HDD Video Recorder can easily be connected to televisions and set up with the use of the DVR remote

How to Install CCTV Security Systems?



A CCTV (closed-circuit television) camera system is a system of cameras that send signals to a specified monitor, used for surveillance in shopping malls, banks, government offices and even homes to ensure safety and keep control of happenings on the premises. A variety of system types are available, from analog and digital to wired and wireless. Each contains the essential components of camera, lens, monitor and cables, if a wired system. Installation takes five to ten minutes requiring only a few steps

• Mark sports for the screws. Place the mounting brackets for each camera against the wall in the desired locations. Draw a small mark with a pencil indicating where the screws will go.
• Drill pilot holes (small holes drilled into a surface to act as a guide for the screws) into the marks for each screw. Secure the mounting brackets by screwing them into place. Drill a hole for the camera feed wire near the mounting brackets.
• Attach each camera to its mounting bracket. Make sure it is secure. Run the feed wire through the drilled hole to the monitor. Tighten and secure the wire to the floor, ceiling, or wall using wall clips or staples. Make sure very little of the wire is left exposed.
• Plug the wire into the monitor and turn on your system. Adjust cameras as needed.
• Install a wireless system by simply placing the cameras where you desire and turning them on. Installation of the accompanied software onto the monitor is needed to configure the monitor to pick up the camera's signal

Package Included:

• 1 x 8-channel Real-time Network H.264 DVR
• 1 x IR Remote Controller
• 1 x DC19V 2.1A Power Adapter
• 1 x Power Cable
• 1 x USB Mouse
• 1 x User Manual