2.4GHz Wireless 2CH Receiver and 380TVL 2 CMOS Color Camera Built-in Microphone Security System RC450A-203T2

Specifications:

• 380 TV line of horizontal resolution
• Small size makes the cameras easy for installing adn monitoring
• 4 channels available to avoid interference
• Built-in microphone in camera enables audio monitoring
• 100m transmission distance without block

Camera:

• TV System: PAL/NTSC
• Validity Pixel: 628(H) x 586(V); 510(H) x 496(V)
• Image Device: 1/3 inch Omn Vision CMOS
• Horizontal Definition: 380TV Line
• Angular Field of View: 45˚ (f=6mm)
• Minimum Illumination: 3.0Lux (F1.2)
• Synchronization System: Internal
• Scanning Frequency (H): 15.625KHz/15.734KHz
• Scanning Frequency (V): 50Hz/60Hz
• Backlight Compensation: Auto
• Electronic Shutter: 1/50(1/60) ~1/100,000sec
• White Balance: Auto
• S/N Ratio: > 48db
• Gamma Correction: > 0.45
• Operation Temperature: -10℃ ~ 50℃/ +14℉ ~ +122℉
• Transmission Frequency: ISM 2,400 ~ 2,483 MHz
• Power Supply: DC 12V/500mA

Receiver:

• Receivable Frequency: 1 Channel: 2.414GHz; 2 Channels: 2.468GHz
• Video Output: 75Ω/1Vp-p
• Audio Output: 10KΩ/200mVp-p
• Signal Output: Can Output One Audio&Video Signal
• Power Consumption: <2W
• Work Temperature: 0~40℃
• Power Supply: DC 12V/500mA

Details:

• This Wireless Camera Receiver Security System will make your life a little bit easier as it's the perfect way to keep an eye on your baby, home, office, car and more! Stable signal with no interference, High resolution display. The Wireless Camera with Receiver is a good choice for you

• Wireless Camera Receiver is Built-in microphone in camera enables audio monitoring .100m transmission distance without block

• Wireless Camera Receiver, Wireless Camera and Receiver, Wireless Camera with Receiver Wireless Camera Receiver with small size makes the cameras easy for installing adn monitoring

What are the recommended camera placements to capture the most relevant shots:

• Never angle a camera to look straight down. A camera that's pointed straight down will only catch the top of a perpetrator's head. The camera will most likely miss many of the distinguishing characteristics that can be used to identify a person later if necessary
• Always make sure to have a camera facing all entrances It is a fact, that the best time to catch the facial features of an individual is during their entrance into the building, whether it is your home or your business. Other cameras can catch the act of someone in the act of stealing; however, without the critical entry-shot you may not be able to identify the individual
• Never allow direct sunlight to touch the lens of the camera. Regardless of which cameras you use, make sure that the cameras are never mounted in such a way that sunlight will directly shine into the lens. This will cause the Image sensor to discolor and fail. Direct sunlight will also immediately void any warranty
• Mount I/R Cameras within 20 ft. of subject being viewed.  Infrared bulbs emit an invisible light spectrum that will illuminate a subject even in complete darkness...however, the light will only project out 20-40 ft. to illuminate the target
• Always plug cameras into a surge suppressor or Battery Back-up unit. Cameras are extremely sensitive to voltage changes and can fail prematurely. Voltage changes will also void the cameras warranty

Package Included:  

• 2 x 2.4G Wireless CMOS Cameras
• 1 x 2.4GHz Wireless Receiver
• 1 x AV Cable