4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver & Transmitter & 1/4" SHARP CCD 420TVL 36 IR LED CCTV Wired Waterproof Camera SYL-4002+2.4G-2.5W+S-200

Specifications:

DVR:

• Video Format: PAL/ NTSC
• Resolution: PAL: 352 x 288(CIF), 704 x 576(D1); NTSC: 320 x 240(CIF), 640 x 480(D1)
• Maximum Format Rate Per Channel: 25 fps (PAL); 30 fps (NTSC)
• Video Channels: Single Channel/ Four Channels
• Audio Format: 8 Bit, one Channel
• Audio Channels: 3101(one audio)/ 3104(two audios)
• Data Format: MEPG4

System Requirements:

• Screen Set: 1024 x 768
• DirectX: DirectX9.0
• RAM: 256M
• VGA: 32M
• CPU: Intel PⅡ 800M
• USB: USB2.0
• OS: Win2k(sp4)/ Winxp(sp2)

Special Notice:

• For usage of the software, please refer to the electronic manual in the CD-ROM
• Our grabbers are equipped with some precise instruments. When they are moved or installed, please be careful
• Make sure that your PC USB interface is 2.0 version, since our grabbers just support USB2.0
• To prevent non-image display, please connect cameras to USB grabbers and power on the cameras, before installing USB grabbers to computer
• If you need to remove the USB grabber, please follow the steps; right click the taskbar→ stop device→ pull out the USB grabber
• Using our grabber with other USB devices simultaneously may cause the problem that PC can not identify USB grabber. Do not insert two or more USB video capture grabbers or use with other PCⅠvideo capture grabbers at the same time
• In case of problems, please contact with local technical support for professional help

2.4G Wireless Receiver Transmitter Kits:

Receiver:

• Color: Silver
• Receiver Channel: 4 Channels
• Frequency: 2.411GHz, 2.431GHz, 2.451GHz, 2.471GHz
• Voltage: DC 12V
• Output Current: ≤300mA

Transmitter:

• Frequency: 2.411GHz, 2.431GHz, 2.451GHz, 2.471GHz
• Transmitting Power: 2500mW
• Transmitting Distance: 350M
• A/V Mode Method: FM
• Transmitting Format: PAL/NTSC
• Input: Video out +R/L Audio in
• Output Current: ≤1600mA
• Voltage: DC 12V
• Operating Temperature: -10℃~50℃

Features:

• Four transmitters can be connected to only one receiver at one time
• Auto switch function, when connected to four transmitters, it can switch automatically to another picture of transmitter every 5 sec
• Strong noise immunity, high transmission frequency can prevent 900 MHz frequency channel crowded to capacity radio telephone interference of signal from effectively extremely
• High quality of video and real stereo wireless transmission

Attention:

• Should install it at the place where children Cannot touch
• Do not expose the Wired CCTV Camera System at the dam place for preventing it from water or protecting people from electric shock
• Please pull the transformer out when you stop using it
• Please use the transformer produced by our company. Or our company will not be in Charge of any damage incurred by the product
• Our company will not be responsible for any damage incurred by your amending or dismounting without a permit
• Do not touch the emission antenna in case you will be burned when the transmitter is electrified

CCD Camera:

• Camera Apparatus: 1/4 Inch SHARP CCD
• IR LEDs: 36Pcs
• Infrared Night Vision Distance: 15m
• Lens: 6mm
• TV System: NTSC
• Horizontal Definition: 420TV Lines
• Backlight Compensation: ON/OFF Switchable
• Lens Mount: C/CS Mount (C Mount adaptor option)
• Mirror Faction: ON/OFF Switchable
• Electronic Shutter Control: EE/AI Switchable
• White Balance: Auto tracking white balance
• Minimum Illumination: 0.8Lux(F:2.0)
• S/N Ratio: More than 48db(AGCOff)
• Electronic Shutter Speed: 1/50(1/60)~1/100,000sec
• Video Output: 1.0Vp-p, 75Ω, (BNC)
• Picture Elements: 768(H) x 494(V)
• Image Size: 4.9 x 3.7mm
• Scanning Frequency: Horizontal:15.7343KHz
• Vertical: 60Hz
• Auto Iris Lens: Video/DC
• Users should not disassemble the camera from the front direction
• Always handle the camera with care. Please do not apply a shock or vibration as much as possible and take cautions not to cause damage or make a scratch on the camera due to careless storage
• Do not clean the camera body with the strong abrasives or soaps. When the camera becomes dirty. Clean it with the dry rugs. Especially make sure to use dedicated rugs for lens to clean the dome cover

Details:

• This Waterproof Camera System is great for watching your house for you, give it best care

• The Wired CCTV Camera System is with 36Pcs LEDs, provides great night vision

• The Wired CCTV Camera System is easy to install, pluy and play

Size in Detail:



How to Protect Your Home With a Security Camera?

• Determine the purpose of your outdoor security camera: will you be monitoring to see who comes up to your front door or do you want to be able to watch all angles of the perimeter of your house and yard?
• Determine the view angle you need from your camera. In general, the wider the view the more the camera will record. This is particularly important if you will be using your camera to see who is approaching your front door and you want to be able to determine whether or not they are alone
• Determine the picture quality that you will need from your security camera and choose a camera that will provide it. While many screens are small and can use a lower resolution, a higher resolution will provide a clearer picture
• Choosing a wireless security camera? Choose a camera with a transmission range that will suit your needs; keep in mind that the walls of your home will reduce the range a wireless camera will have
• Planning to record the signal? Choose a camera that will broadcast to the system that you have chosen: closed circuit tv, your computer or a digital video recorder

• Do you want to have a camera that will be on all the time or do you want a camera that will start recording when movement is detected? Either way, a motion detector camera can make sure that you are able to record anything that happens
• Determine the size and type of security camera you are looking for. Do you need a camera that can zoom in, a camera that blends in or a camera that can record sound?

• Lastly, determine whether you want a camera that is monitored by a security company or not; if you do, be sure to choose the right company. Ask questions and get recommendations

How to Install an Outdoor Security Camera System?

• Select the type of connection you want; you can choose a wired or a wireless connection. Wireless systems are easier to install with no limitations on the distance between the devices and the monitors. Be aware, however, that wireless connections are subject to signal interference. If you choose to install a wired connection, it will require more work, but you won't have any signal interference. Wireless cameras are also battery-operated, so you will have to replace the batteries periodically. Wired cameras connect to the monitors, which run on the main power source

• Decide where you want your security camera. Place your camera in a position that will display the entire area you wish to view. Then, decide whether you want your camera visible or hidden. If you set up a wired camera system, hiding and wiring your device will be more difficult
• Drill holes for mounting the brackets. If you are setting up more than one camera, make sure you allow enough distance in between. Test your camera or cameras by turning them on and placing them in position. View the coverage area and decide where to drill your holes. If you are using a wired system, make sure the camera cables are long enough to connect your camera to your monitor

• Attach the brackets using the screwdriver. Regardless of whether your camera is on the ground or on a wall, you will need brackets to securely position your camera. Make sure your brackets are tight and stable enough to hold the camera
• Mount the camera on the brackets. Make sure everything is tightly secured
• Select a location for your monitor. The monitor should be where you spend the most time. 

If you are using a wireless system, you have completed the setup process

• Run a cable from each camera to your monitor if you are using a wired system. Cables can run along door and floor edges or under a carpet. Use electrical tape or a staple gun to secure your wires. If your monitor does not have multiple plugs for your camera cables, you need to purchase a multiplexer. Plug your camera cables into the multiplexer and plug the multiplexer into the monitor
• Turn on your system to view your area

Package Included:

• 1 x 4 Channel MEPG4 DVR
• 1 x Software CD
• 1 x Wired Waterproof Camera
• 1 x Wireless Receiver
• 1 x Wireless Transmitter
• 1 x AV Cable
• 1 x Adapter for Receiver
• 1 x Adapter for Transmitter
• 1 x Antenna for Receiver
• 1 x Antenna for Transmitter
• 1 x Power Adapter