1/4" SHARP CCD 420TVL Wired Camera with Wireless Converter & 2.4GHz LCD Receiver Kit SYL-4002+KT-401+SRT-688T

Specifications:

Camera:

• Camera Apparatus: 1/4" SHARP CCD
• IR LEDs: 36PCS
• Infrared Night Vision Distance: 15m
• Lens: 6mm
• TV System: NTSC
• Horizontal Definition: 420TV lines
• Backlight Compensation: ON/OFF switchable
• Lens Mount: C/CS mount (C mount adaptor option)
• Mirror Faction: ON/OFF switchable
• Electronic Shutter Control: EE/AI switchable
• White Balance: Auto tracking white balance
• Minimum Illumination: 0.8Lux(F:2.0)
• S/N Ratio: More than 48db(AGCOff)
• Electronic Shutter Speed: 1/50(1/60)~1/100,000sec
• Video Output: 1.0Vp-p, 75Ω, (BNC)
• Picture Elements: 768(H) x 494(V)
• Image Size: 4.9mm x 3.7mm
• Scanning Frequency: Horizontal: 15.7343KHz/Vertical: 60Hz
• Auto Iris Lens: Video/DC
• Users should not disassemble the wired camera from the front direction
• Always handle the wired camera with care. Please do not apply a shock or vibration as much as possible and take cautions not to cause damage or make a scratch on the camera due to careless storage
• Do not clean the wired camera body with the strong abrasives or soaps. When the camera becomes dirty. Clean it with the dry rugs. Especially make sure to use dedicated rugs for lens to clean the dome cover

Converter:

• Transmission Power: 10mW/CE, 2mW/FCC
• Power Supply: DC 12V
• Consumption Current: 20mA (Max.)
• Wired Camera Converter to Wireless Camera: The converter, which designed for CCTV Camera with BNC plug. can convert the signal from CCTV Camera to wireless signal and send to the wireless receiver some where
• Ultra-small: With the ultra-small size of 39mm (W) x 35mm (D) x 33mm (H) of main body, the Camera could beused for discreet observation. Also it could be used for portable monitoring with Battery or Battery group
• 4 Channels Available: The product works at ISM-2.4GHz. When it is interfered by other wireless equipment at the same band. You could change the operation channel to avoid interference
• 100m Transmission Distance: The product achieves at least 100 meter transmission distance without block. According to the essential principle of electromagnetic wave, actual transmission distance may reduce by through the bemires such as wall, floor, and ceiling , etc
• Transmit video signal by 2.4GHz frequency band
• With BNC connector plug
• 4-channel available to avoid interference
• Built-in microphone for Audio monitoring
• Min. 100m transmission distance without block
• Suitable for CCTV camera and other video devices

Receiver:

Wireless Receiver:

• Receiver Channel: 4CH CH1:2414MHz; CH2:2432MHz; CH3:2450mhZ; CH4:2468MHz:  
• Db Level: -90dB

Video:

• LCD 2.5 TFT: 960 x 240 Trans.ective LCD
• Frequency Property: FM 2.4MHz
• Video Mode: NTSC/PAL
• Video Out Mode: NTSC/PAL
• Resolution: 640 x 480/320 x 240 / 160 x 128
• Compressed Video Format: MPEG-AVI Max 30pfs
• Play File Format: MPEG-4/AVI/ASF/ADPCM/MOV/WMV/ WAV

Audio:

• Speaker: 2W
• Frequency Range: 20Hz-20KHz
• Output Channel: Stereo
• Earphone Output: L20MW+R 20mW[160](Max volume)
• Play File Format: MP3

Picture:

• File Format: JPG/JPEG/GIF

Storage:

• Flash Memory: 64MB
• Storage Media: SD/MMC

Battery:

• AS Adapter: DC 5V 2A
• Internal Battery: Li-io battery 2500mAh

Operating System Supported:

• Serial Bus: USB 2.0;USB OTG1.1
• Disk File Format: FAT32
• Language: Chinese/English
• IBM-PC: Windows 98SE.ME.2000.XP

Standby Time:

• Wireless Recorder: ≥4.5 HRS
• Player: ≥7 HRS

Details:

• Camera set

• Front of camera converter

• Back of camera converter

• Front of camera receiver

• Back of camera receiver

• Basic structure of camera receiver

Package Included:

• 1 x 1/4 Inch SHARP CCD Wired Camera
• 1 x Ultra-small Camera Converter
• 1 x 2.4GHz 4 Channel Wireless LCD Monitor Receiver