1/3 Inch SONY CCD 540TVL Underwater Camera with Mini DVR System CM-DWL500CH

Specifications:

• 1/3" SONY CCD 540TVL Underwater Camera
• 8pcs highlight white leds to assure excellent pictures in dark place
• Stainless steel material housing
• IP68, passing SGS the IP-X8 Continuous Immersion Test
• Suitable for diving, underwater work and exploration, diving, fishing

Details:

How to Clean an Underwater Camera:

• As you learn how to clean an underwater camera, make sure to inspect all cover doors regularly, including the ones for the battery and USB port. These should be free from debris and anything else which may allow water to leak into the underwater camera
• Remove any dirt or debris with a soft, lint free cloth. Take care to also remove any drops of water with the same type of cloth. This should be done both before and after each use
• Inspect visually all waterproof casings and seals, to make sure that there are no cracks or tears. Make sure that all doors close properly, and that the camera is not damaged in any way. If there is visible damage, do not use the camera underwater until the casings are replaced
• Fill the bucket with fresh water, making sure that it is free from any salt or other chemicals, as this could cause damage to the camera
• Close all doors on the camera, making sure that it is securely sealed. Immerse it into the bucket, with the lens facing downwards
• Open and close the lens cover a number of times, this is usually done by pressing the power button. This will make sure that any dirt or other obstructions are removed, preventing the lens cover from becoming stuck or damaged
• Remove the underwater camera from the bucket of water and gently shake off any excess liquid. Dry it using a clean cloth, then leave to air dry with all of the doors open. Now you know how to clean an underwater camera

Package Included:

• 1 x Underwater Camera with 50m Cable
• 1 x DVR
• 1 x Li-ion Battery
• 1 x USB Cable
• 1 x AV Cable
• 1 x Charger
• 1 x Box
• 2 x Keys
• 1 x Card Case