Customers Also Bought
- Image Sensor: 1/3“ SONY super HAD CCD
- Pixels: PAL: 512H x 582V
- Signal System: PAL / NTSC
- Horizontal Resolution: 420TV Lines
- Minimum Illumination: 0.5LUX/F1.2
- S/N Ratio: ≥48dB
- Video Output: 1.0Vp-p/75Ω
- Automatic Gain Control: AGC ON/OFF
- Backlight Compensation: Auto
- White Balancet: BLC ON/OFF
- Exposure Mode: EE/AL
- Shutter Speed: 1/50(1/60)-1/100000sec
- Gamma Correction: 0.45
- Sync System: Internal Synchronization
- Lens Drive Mode: Video / DC
- Lens Mount: C/CS
- Operating Voltage: DC12V±5%
- Operation Temperature: -20℃-50℃
- 1/3" SONY CCD 420TVL dome camera
- Regulated power supplies are recommendable
- Auto tracking white balance
- Internal synchronization sync system
- Dome cameras offer several advantages when used as part of home security systems
How to Install a Dome Camera in a Home Security System:
- Select the location where you would like to install the dome camera
- Drill holes to install the mounting bracket
- Insert the camera into the dome and connect wiring, if necessary
- Adjust the camera to the correct position
- Test the dome camera to make sure it is working properly
How to Clean a Dome Camera:
- Apply Lexan cleaning solution liberally to the washable mitt. Gently wring out the washable mitt.
- Attach the washable mitt to the mitt holder. Attach the mitt holder to the extension pole.
- Grasp the pole and lift the end with the mitt up toward the dome camera.
- Cradle the dome of the dome camera with the mitt so that the mitt surrounds the entire dome.
- Rotate the pole clockwise so that the mitt rotates around the dome of the security dome camera. Reverse direction and rotate the mitt counterclockwise. Remove the mitt. Let the dome camera dry.
- Reapply Lexan cleaning solution to the washable mitt. Repeat the cleaning process of rotating the mitt clockwise and then counterclockwise on the dome of the dome camera. Remove the mitt and let the dome camera dry.
- Remove the mitt holder from the extension pole. Remove the washable mitt from the mitt holder. Clean the washable mitt in cold water and let it dry.
- 1 x 1/3" SONY CCD 420TVL Dome Camera
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 30.52||USD$ 28.98||USD$ 27.45||USD$ 25.40|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.