1/3 Inch SONY CCD 520TVL Dome Camera SPD-125

Specifications:

• Image Sensor: 1/3" SONY super HAD CCD
• Effective Pixels: PAL: 512(H) x 582(V)
• Signal System: NTSC / PAL
• Horizontal Resolution: 520TV Lines
• Minimum Illmination: 0.5LUX / F1.2
• S/N Ratio: More than 48db
• Shutter Speed: 1/50(1/60)~1/100,000sec
• Video Output: 1.0Vp-p,75Ω
• Backlight Compensation: Auto
• White Balance Method: BLC ON / OFF switch
• Exposure Mode: EE / AL
• Gamma Correction: 0.45
• Synchronization: Internal synchronization
• AGC: AGC ON (Low) / OFF (high) switchable
• Lens Drive Mode: Video / DC switchable
• Lens Mount: C/CS
• Operating Voltage: DC12V ± 5%
• Operating Temperature: -20℃-50℃
• Waterproof body design, both indoor and outdoor use
• The clean photograph machine-hour please do not use the intense cleanser
• Please don't have to treat the pickup camera the sun, no matter is in the room or outside, please do not have operates
• With SONY CCD 520TVL chipset, this camera provides excellent images and superb low lux rating for near complete darkness operation

Details:

• Waterproof body design, both indoor and outdoor use

 How to Install a Dome Camera in a Home Security System:

• Select the location where you would like to install the dome camera
• Drill holes to install the mounting bracket
• Insert the camera into the dome and connect wiring, if necessary
• Adjust the camera to the correct position
• Test the dome camera to make sure it is working properly

How to Clean a Dome Camera:

• Apply Lexan cleaning solution liberally to the washable mitt. Gently wring out the washable mitt.
• Attach the washable mitt to the mitt holder. Attach the mitt holder to the extension pole.
• Grasp the pole and lift the end with the mitt up toward the dome camera.
• Cradle the dome of the dome camera with the mitt so that the mitt surrounds the entire dome.
• Rotate the pole clockwise so that the mitt rotates around the dome of the security dome camera. Reverse direction and rotate the mitt counterclockwise. Remove the mitt. Let the dome camera dry.
• Reapply Lexan cleaning solution to the washable mitt. Repeat the cleaning process of rotating the mitt clockwise and then counterclockwise on the dome of the dome camera. Remove the mitt and let the dome camera dry.
• Remove the mitt holder from the extension pole. Remove the washable mitt from the mitt holder. Clean the washable mitt in cold water and let it dry.

 Package Included:

• 1 x 1/3" SONY CCD 520TVL Dome Camera