1/3" SONY CCD 480TVL Wired Camera with Wireless Converter & 2.4GHz LCD Receiver Kit SYL-610+KT-401+SRT-688T

Specifications:

Camera:

• Image Device: 1/3 inch SONY Color CCD
• Number of Pixels: PAL: (H)500 x (V)582; NTSC: (H)510 x (V)492
• Scanning System: PAL: 625 Lines, 50 Field/Sec
• Sync System: Internal Synchronization
• Horizontal Resolution: 480 TV Line
• Minimum Illumination: 0.5 Lux
• S/N Ratio: More Than 46db
• Gamma Characteristic: 0.45
• Video Output: 1Vp-p 75 Oms, Negative
• Electronic Shutter: 1/50~1/100,000 Sec
• White Balance: Auto
• Housing: Black
• Built-In Lens: 4mm Lens
• Operation Temperature: -10°C ~ + 50°C, RH 95% Max
• Storage Temperature: -20°C ~ + 60°C, RH 95% Max
• Dimension: ø100 mm
• Power Consumption: 12V±10%DC, 100mA
• NTSC System: Available
• New 1/3 inch Sony chip, 480 TV line, dome, ironbound blast shelter armor
• Security CCTV wired CCD color camera with 4mm lens

Converter:

• Transmission Power: 10mW/CE, 2mW/FCC
• Power Supply: DC 12V
• Consumption Current: 20mA (max.)
• Size: 39 x 35 x 33mm / 1.54 x 1.38 x 1.3in (L x W x H)
• Transmit video signal by 2.4GHz frequency band
• With BNC connector plug
• 4-channel available to avoid interference
• Built-in microphone for audio monitoring
• Min. 100m transmission distance without block
• Suitable for CCTV camera and other video devices
• The wireless baby converter is designed for CCTV camera with BNC plug, can convert the signal from CCTV camera to wireless signal and send to the wireless receiver some where
• With the ultra-small size of 39mm (L) x 35mm (W) x 33mm (H) of main body, the camera could beused for discreet observation. Also it could be used for portable monitoring with battery or battery group
• The product works at ISM-2.4GHz. When it is interfered by other wireless equipment at the same band. You could change the operation channel to avoid interference
• The product achieves at least 100 meter transmission distance without block. According to the essential principle of electromagnetic wave, actual transmission distance may reduce by through the bemires such as wall, floor, and ceiling , etc.

Receiver:

• Receiver Channel: 4CH CH1:2414MHz; CH2:2432MHz; CH3:2450mhZ; CH4:2468MHz:  
• Db Level: -90dB

Video:

• LCD 2.5 TFT: 960 x 240 Trans.ective LCD
• Frequency Property: FM 2.4MHz
• Video Mode: NTSC/PAL
• Video Out Mode: NTSC/PAL
• Resolution: 640 x 480/320 x 240 / 160 x 128
• Compressed Video Format: MPEG-AVI Max 30pfs
• Play File Format: MPEG-4/AVI/ASF/ADPCM/MOV/WMV/ WAV

Audio:

• Speaker: 2W
• Frequency Range: 20Hz-20KHz
• Output Channel: Stereo
• Earphone Output: L20MW+R 20mW[160](Max volume)
• Play File Format: MP3

Picture:

• File Format: JPG/JPEG/GIF

Storage:

• Flash Memory: 64MB
• Storage Media: SD/MMC

Battery:

• AS Adapter: DC 5V 2A
• Internal Battery: Li-io battery 2500mAh

Operating System Supported:

• Serial Bus: USB 2.0;USB OTG1.1
• Disk File Format: FAT32
• Language: Chinese/English
• IBM-PC: Windows 98SE.ME.2000.XP

Standby Time:

• Wireless Recorder: ≥4.5 HRS
• Player: ≥7 HRS

Details:

• This wireless wireless baby converter is really a portable unit that allows parents to see, as well as hear

• Large color display screen of this baby monitor receiver allows you to get the best view of your sweet baby
• This baby wired camera kit will make your life a little bit easier as it's the perfect way to keep an eye on your baby, home, office, car and more

• The angle of this wireless baby converter is able to adjusted, which allows you put the camera a little far from your children

Benefits of Using a Video Baby Monitor

For years, parents have used audio baby monitors to listen to their children's activities at nap time and bedtime. Recently, however, this useful technology has been upgraded, as video baby monitors have hit the market. These monitors deliver both audio and visual information. Although video baby monitors are more expensive than the older variety, the benefits of video baby monitors make them well worth the cost

• Peace of Mind: A video baby monitor provides greater peace of mind for a parent than an audio monitor because of the additional information it offers. A visual picture allows parents to be aware of their child's position, safety and crib habits even when the child is being quiet. It also helps parents to sleep well at night, giving them full confidence that they can check on their baby at any time without even getting out of bed
• Scope of Monitoring: A video monitor allows parents to supervise a wider variety of their child's crib activities than simply the noises he makes in bed. If a child is repeatedly throwing up in his bed, a video monitor may reveal that he is gagging himself, or if he is pulling things into his crib from a nearby table, a video monitor may show how he is managing the feat so it can be avoided in the future
• Watching Without Waking: Parents often feel the need to regularly check on their child during her nap or in the night to be sure she is sleeping, breathing and resting comfortably. A video monitor easily meets this need without the risk of waking the child.
• Shared Bedroom: When an older sibling shares a baby's room, a video monitor can help parents supervise the older child's interaction with the younger child. A parent can allow the two children to nap in the same room, knowing that the monitor will reveal when the older child wakes, before that child is able to unintentionally put the baby at risk by dropping toys into the crib or climbing into the crib
• Health Concerns: A video monitor can serve as a helpful tool for enhancing the health and safety of children with physical problems. For example, a video monitor can alert parents to a child's asthma or allergy attack that may be undetectable on an audio monitor. For children with skin problems such as eczema, a video monitor can alert parents to a child's scratching and discomfort

How Does a Baby Monitor Work?

• Basics: Since babies sleep a lot and new parents can't stay in the room with a baby the entire time, the baby monitor is a great way to listen for sounds of distress from the child. A baby monitor is a device that sends sound over a one-way radio frequency to a receiver. The distance the sound is projected varies between different models. Most baby monitors are built to work within a distance of about 150 feet. The transmitter is placed in the room with the baby and should be plugged in no more than 10 feet away from the crib. The receiver is usually portable and carried around with the parent throughout the house and outside on the porch or in the yard
• Issues: The radio frequency used to transmit sound from the baby to the caregiver is the same frequency used for cordless telephones and other transmissions that can come from police and emergency signals. More expensive models are built with higher frequency abilities that can eliminate outside interference. Baby monitors used by neighbors also can provide interference in listening to a child in one household. Monitors that come with a scrambler can minimize and remove any outside interference. To work, baby monitors must be turned on at both ends. Less expensive baby monitors that run on batteries may leave parents under a false impression that they are secure in their ability to hear when the baby wakes up
• Advanced: Look for features that allow the baby monitor to work through any number of scenarios. Monitors such as the Evenflo Monitor and Intercom are usually less than $80. They beep when the battery is low and provide an option to turn the sound down and display noise by emitting a flashing light, which may be useful when parents do not want to disturb others in the room. The Evenflo model also features a two-way sending option that allows parents to speak back to the child, sometimes soothing the infant back to sleep. More advanced baby monitors come with video displays that send pictures to the receiver over a digital wireless signal. Audio/video baby monitors such as the Babyview20 by Levana run closer to $200. High-speed microprocessors are built into the latest baby monitors that are placed under the sleeping baby and detect movement. If the baby stops moving for more than 20 seconds, an alarm sounds. Movement detection monitors such as the Babysense V from BabySafe also include the traditional sound monitor and cost about $100

How to Buy a Baby Monitor

Baby monitors are radio transmitters that allow you to hear your baby when you're not present in the room with her. Monitors come in a variety of styles and include many different features, so follow these steps to buy one that suits your needs and lifestyle

Instructions

• Look for a baby monitor with a small receiver, which will make it more convenient for you to tote around your home. Make certain the baby monitor will run on batteries
• Buy a baby monitor with a light that activates when it picks up sound. This feature will allow you to know your baby is awake and needs you when you're running the dishwasher, listening to music, or vacuuming and cannot hear the noise from your baby's room
• Find a baby monitor that includes two receivers which will allow you to leave first receiver in your bedroom or another room you frequent often, and carry the second receiver around the house with you
• Verify that you can easily clip or attach the baby monitor's receiver to your belt loop if you plan on carrying it around with you
• Search for and buy a baby monitor that includes a low-battery light; when lit, it indicates that you need to replace the batteries
• Research the bandwidth you need for your home. Pricier baby monitors include a bandwidth of 900 megahertz, which provide great reception, but this kind of reception is only available in suburban or rural areas. If you live in an urban area with a lot of interference, a baby monitor with 40 megahertz should suit your needs just fine
• Purchase a multiple-room baby monitor if you have more than several children you need to care for. These baby monitors often come with up to three transmitters and receivers for three different rooms, and can help you keep tabs on all three rooms or a single room

Tips & Warnings

• Baby monitors are priced from $50 to $100 for transmitter and receiver models, and close to $300 for baby monitors that include a video monitor
• Keep a baby monitor away from water at all time to prevent the risk of electrocution

Package Included:

• 1 x 1/3" Sony Chip, 480 TV Line, Dome, Ironbound Blast Shelter Armor Security CCTV Wired CCD Color Camera with 4mm Lens
• 1 x Wireless Converter
• 1 x 2.4GHz 4 Channel Wireless LCD Monitor Receiver