1/3 inch SONY 540TVL Vandal Proof Double Lens IR CCD Dome Camera

Specification:

• Image Sensor: 1/3 inch SONY CCD
• Horizontal Resolution: (Color) 540 TV Line. (B / W) 600 TV Line
• Signal System: PAL/NTSC
• IR Lens: 3.6 mm
• Minimum Illumination: 0.5Lux/F1.2(LED OFF) 0Lux ( LED ON)
• Effective Pixels: 752(H) x 582(V)(PAL), 768(H) x 494(V)(NTSC)
• S/N Ratio: More than 52dB
• Electronic Shutter: 1/50-1/100,000sec(PAL),1/60-1/100,000sec(NTSC)
• White Balance: Automatic
• AGC/BLC: Automatic
• IR Series Distance: 25-35 Meter
• View Angle: 60 Degree
• LED Wave Length: 30 units 850nM Infrared LED
• Average Life: 20000hrs
• Water Resistance: IP65
• Video Output: Composite Video Output(1.0Vp-p 75ohm Terminated)
• Power Supply: DC 12V 450mA (+/-10%)
• Operation Temperature: -10degree C to +50degree C

Features:

• Import infrared light, the dome camera can provide sufficient non-visible light source
• Dual CCD camera, 24-hour day and night surveillance
• This dome camera features shell characteristics of materials, dust fog waterproof up to IP65 waterproof rating

Details:

• Double lens design dome camera

• LED lights

• Adjustable angle

• Easy to use

• Durable power cable

• Size in detail

How to Install an Outdoor Security Camera System:

• Step 1: Select the type of connection you want; you can choose a wired or a wireless connection. Wireless systems are easier to install with no limitations on the distance between the devices and the monitors. Be aware, however, that wireless connections are subject to signal interference. If you choose to install a wired connection, it will require more work, but you won't have any signal interference. Wireless cameras are also battery-operated, so you will have to replace the batteries periodically. Wired cameras connect to the monitors, which run on the main power source
• Step 2: Decide where you want your security camera. Place your camera in a position that will display the entire area you wish to view. Then, decide whether you want your camera visible or hidden. If you set up a wired camera system, hiding and wiring your device will be more difficult
• Step 3: Drill holes for mounting the brackets. If you are setting up more than one camera, make sure you allow enough distance in between. Test your camera or cameras by turning them on and placing them in position. View the coverage area and decide where to drill your holes. If you are using a wired system, make sure the camera cables are long enough to connect your camera to your monitor
• Step 4: Attach the brackets using the screwdriver. Regardless of whether your camera is on the ground or on a wall, you will need brackets to securely position your camera. Make sure your brackets are tight and stable enough to hold the camera
• Step 5: Mount the camera on the brackets. Make sure everything is tightly secured
• Step 6: Select a location for your monitor. The monitor should be where you spend the most time. If you are using a wireless system, you have completed the setup process
• Step 7: Run a cable from each camera to your monitor if you are using a wired system. Cables can run along door and floor edges or under a carpet. Use electrical tape or a staple gun to secure your wires. If your monitor does not have multiple plugs for your camera cables, you need to purchase a multiplexer. Plug your camera cables into the multiplexer and plug the multiplexer into the monitor
• Step 8: Turn on your system to view your area

Package Included:

• 1 x IR Lens Security Camera