SM-16 Recording Microphone

Specifications:

• Transducer Principle: Back Electret Condenser
• Directivity Characteristic: Cardioid
• Frequency Response: 30Hz-20kHz
• Sensitivity: -34dB±2dB (0dB=1V/Pa at 1kHz)
• Output Impedance: 400±30% (at 1kHz)
• Load Impedance: ≥1000
• Equivalent Noise Level: 18dB A (IEC 581-5)
• Max. Input SPL: 135dB (THD '1.0? 1/4 at 1kHz)
• Power Requirements: 48V Phantom Power
• Body Dimensions: 45 x 150mm/1.8 x 5.9in(Dia. x L)

Features:

• Gold-plated diaphragm for accurate sound reproduction
• Consistent cardioid polar pattern
• High sensitivity, low self noise and low distortion
• Wide and smooth frequency response range
• Supplied with clip-tight elastic-suspension shock mount
• Suitable for recording, broadcasting, as well as on-stage performance

Details:

• Suitable for recording, broadcasting, as well as on-stage performance.The Recording Microphones are designed for TV studios, recording studios, broadcasting stations and on-stage performances. Its smart design permits flexible and unobtrusive positioning.This is a Professional Recording Microphones

• Supplied with clip-tight elastic-suspension shock mount.The gold-plated diaphragm it adopts assures low self-noise, high output and the accurate reproduction of even the subtlest sounds, especially high frequency signals not easily reproduced by conventional microphones. Studio Recording Microphones is Preference of Recording Lovers

• Consistent cardioid polar pattern.Best Recording Microphone is supplied with metal shock mount, cable and table stand. The Best Recording Microphone is perfect for Podcast Producers

Size in Detail:

How to Use a Microphone on a Laptop:

• Connect your microphone to the external output jack on the side of your laptop. Turn on your computer and open the Control Panel
• Make sure you have the right driver device for your microphone, according to the manufacturer's specifications. If you do not see the correct driver, download the driver device from the manufacturer
• In the Control Panel of your computer, click on the type of external microphone you have. If it is not recognized, click on "Default Microphone" and highlight "External Microphone."
• Verify that the sound card is compatible with your external microphone. Check the volume control on the computer and make sure your microphone is turned on. You have now installed an external microphone, and should be able to speak with your friends and other contacts without any problem

How Do I Get a Mic to Work on a Laptop Computer:

• Read the instructions with your microphone's software, if applicable. Some mics may require that the software be installed before plugging it in
• Plug your microphone into the microphone jack. This is indicated by a small microphone above or below the jack
• Allow your operating system to automatically detect the microphone and install the default drivers.
• Test your microphone. If it doesn't work, you'll have to download and install the drivers from the microphone's manufacturer's website. This will vary for each manufacturer
• Go to the sound settings for any programs you want to use with the microphone if you encounter problems. Choose your microphone from the list provided in the settings to allow input from your specific microphone

Package Included:

• 1 x PM-5 Phantom Power
• 1 x C6-1 wiring
• 1 x C6-2 wiring
• 1 x Microphone
• 1 x Carry Case
• 1 x Shock Mount
• 1 x Microphone Windproof Foam