Customers Also Bought
- Power Supply: DC 12V
- Current: <180mA
- Rated Power: ≤ 5W
- Opening Hours: 1-65535 seconds
- Temperature: <60 ℃
- Humidity: 10% ~ 95% R.H
- Size: Approx. 220 x 130 x 23mm / 8.66 x 5.12 x 0.91in(L x W x H)
- It can be bi-directional access control board
- 20000 card management authority
- 100,000 records of offline storage
- TCP / IP LAN WAN network control
- With anti-submarine, interlocking, multi-card access, card access, first door access and other advanced functions
- It can be bi-directional access control board
How to clone your MAC Address
- As mentioned, the MAC Address in principle were designed so they can not be changed. However, there are many reasons (legal or not) to justify the fact that you want to change your MAC Address. One of these reasons, and perhaps the main one, is that ISPs, Cable Modem, more precisely, record and monitor your users by MAC Address, which often create certain disadvantages (e.g to share the Internet connection with other PCs).
- There are several ways to modify and / or clone the MAC Address on Windows, including complex changes in the registry (regedit.exe), but the easiest one I found was to use a small application called EtherChange (runs on Windows 2000/XP/2003 / Vista).EtherChange After downloading, run the program and proceed to clone the MAC Address:
- Select the appropriate network adapter (network card). type 1 to specify a new ethernet address, or MAC Address. Enter new MAC Address without commas, dashes or any other separators.
- Update: There is also another alternative (among others) to change the MAC Address, which is to go to the configuration of our network card and specify the hexadecimal value corresponding to the address.
- The steps are: We go to [Control Panel] Windows -> [Network Connections]/We double click on our link (network connection local area ...)/Properties and then click Configure.
- Then go to the Advanced tab or Advanced Options.
- Within the tab look for the Network Address field and specify the hex value that will address our MAC board.
- The problem with this method is that not all network cards allow us to change the MAC Address, but still it is useful to know.
Advantages and Disadvantages of IP Controllers
- An existing network infrastructure is fully utilized; there is no need to install new communication lines.
- There are no limitations regarding the number of IP controllers in a system (the limit of 32 controllers per line is typical for systems using RS-485 communication interface).
- Special knowledge of installation, termination, grounding and troubleshooting of RS-485 communication lines is not required.
- Communication with IP controllers may be done at the full network speed, which is important if transferring a lot of data (databases with thousands of users, possibly including biometric records).
- In case of an alarm IP controllers may initiate connection to the host PC. This ability is important in large systems as it allows reducing network traffic generated by frequent polling.
- Simplifies installation of systems consisting of multiple locations separated by large distances. Basic Internet link is sufficient to establish connections to remote locations.
- Wide selection of standard network equipment is available to provide connectivity in different situations (fiber, wireless, VPN, dual path, PoE)
- No special hardware is required for building fail-over systems: in case the primary host PC fails, the secondary host PC may start polling IP controllers
- The system becomes susceptible to network related problems, such as delays in case of heavy traffic and network equipment failures.
- IP controllers and workstations may become accessible to hackers if the network of an organization is not well protected. This threat may be eliminated by physically separating the access control network from the network of the organization. Also most IP controllers utilize either Linux platform or proprietary operating systems, which makes them more difficult to hack. Industry standard data encryption is also used.
- Maximum distance from a hub or a switch to the controller is 100 meters (330 feet).
- Operation of the system is dependent on the host PC. In case the host PC fails, events from IP controllers are not retrieved and functions that required interaction between readers (i.e. anti-passback) stop working. Some controllers, however, have peer-to-peer communication option in order to reduce dependency on the host PC.
- Unlike IP readers, most IP controllers do not support PoE. This, however, may change if the PoE technology is improved to deliver more power, or low-power controllers and locks are introduced. Based on the current PoE standards power that can be carried by a single network cable is enough for one IP reader and an electric strike or a magnetic lock, but connecting an IP controller and 2 or more electric locks would require more power than available via PoE
- 1 x TCP/IP One Door Network Access Controller Board
- 1 x Power Supply
General Model SK -1000TCP Spec Condition New Type One Door Network Access Controller Board Parameters
Power Supply: DC 12V
Rated Power: ≤ 5W
Opening Hours: 1-65535 seconds
Compatibility Access Control Door Alarm Dimension Approx. 220 x 130 x 23mm / 8.66 x 5.12 x 0.91in(L x W x H) Features Features It can be bi-directional access control board
20000 card management authority
100,000 records of offline storage
TCP / IP LAN WAN network control
Packaging Package Included 1 x TCP/IP One Door Network Access Controller Board
1 x Power Supply
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 101.51||USD$ 97.80||USD$ 94.10||USD$ 89.16||USD$ 89.16|
|Enter Wholesale Channel>>|
100% Made to Measure Dresses
The Best Price
Speedy Delivery Times
Q: Are the dresses made by your own factory?
A: DinoDirect has our own factory with over five years’ experience in making dresses.
Q:Is the price on your website real price, why it is much cheaper than market price?
Q: How to make sure the quality?
Q:How do I place my order in this website?
Q:How do I use the search option of your site?
Q:Can you customize the size of my dress?
1.Ask someone else to measure for you
2.Take measurements while wearing undergarments similar to what you’ll wear with the dress
3.Provide a bust measurement from the fullest part of your chest, not your bra size!
Q:Can I order this dress in a different style/fabric/length?
PS: Some dresses do not have “Item Remarks” Tag.
Q: If I buy 2 or more dresses at the same time, do I need to pay postage for twice or more?
Q: How will my item (s) be shipped?
A: All shipping information is outlined in our shipping page.
Q: How long is the delivery time?
Q: Will my dress exactly match the color I see on your website?
Q:Can I make changes to my order after I have paid for my order?
Ensuring your order number is included.
Q: What should I do if the size doesn’t fit me perfectly?
Q:How do I upgrade my shipping?
A: Simply respond to your confirmation email with the method you would like to change it to.
Q:How to Preserve my Dress?
Q:What should I do if I have forgotten my password or my password does not work?