Stylish Copper Double Handle Bathroom Wall-mount Thermostatic Faucet

Specifications:

• The thermostatic double handle faucet is easy for you to install the faucet correctly even if you never install faucets before
• The service life of valve of the thermostatic double handle faucet can attain to many times which allows our thermostatic mixer to be used for a long time
• Each of our double handle faucet thermostatic faucet been performed with high water pressure test before delivery to ensure the absolute quality
• Thermostatic copper faucet is controlled by built-in automatic adjustable temperature valve, so it can balance the water pressure of cold and hot water in short time to maintain the stability of water temperature
• All of our faucets have been proved to be no-leak during lifetime due to the durable ceramic valves
• Each of our home bathtub faucet has been performed with high water pressure test before delivery to ensure the absolute quality
• Installation Type: Wall Mounted
• Valve Type: Ceramic
• Material: Copper
• Color: Silver

Detail:

• The thermostatic faucet adds modern look in your bathroom. By the double handles, you can adjust the temperature

• Detail of the handle. The thermostatic double handle faucet is easy for you to install the faucet correctly even if you never install faucets before

• The service life of valve of the thermostatic double handle faucet can attain to many times which allows our thermostatic mixer to be used for a long time

• Each of our double handle faucet thermostatic faucet been performed with high water pressure test before delivery to ensure the absolute quality

General Faucet Installation Instruction:

Step 1: Position the Faucet

Step 2: Attach the Water Supply Tubes



Step 3: Connect the Faucet Lift Rod

Step 4: Flush the Faucet

Cleaning Methods:

• Cleaning Surface: Use cleaning agent to clean the dirt regularly. The faucet should be rinsed with clean water and wipe it with a soft cotton cloth to keep surface clean before scrub the faucet. Do not wipe the faucet with abrasive cleaners, hard cloth, paper towels, wire ball and acidic or coarse material
• Cleaning Filter: Remove the filter. Then scrub the filter with a toothbrush or small brush under the tap

How to Select Facuet:

• Suitable Style: The Faucet should match the characteristics of washbasin, sink and bathtub. For example, a single-hole faucet fit single-hole washbasin, and a center set faucet fit center set washbasin
• Proper Function: According to different purposes of the faucets, there are faucets for washbasin, bathtub, shower and sink. According to different functions of the faucets, there are hot cold faucets, pressure-balanced faucets, thermostatic faucets and electrical sensor faucets
• Fine Finish: A well chrome-plated faucet looks dignified and with a little verdant color, when it looks pale, the plating density is not up to standard, when touched by hand or eye-observed, there must be no scratches, sand holes and oxidized spots. Our faucets have been proved to meet high requirement of United States and European chrome-plating standard
• Operation Inspection: Handles must be smooth and easy to operate for high-quality faucets. There shall be no sticking and tightness under the proper movement of the faucet handles. Each part must be tightly assembled
• Valve: It is the heart of the faucet. A good Valve guarantees endurance of 500,000 cycles even under using condition with unstable water pressure. Most of our faucets use ceramic valves which can attain to more than 600,000 cycles

NOTE:

• Please wash off the dirty water, debris, sand, and impurities before you install, to prevent foaming obstruction or the ceramic valve is damaged

How to Fix a Shower Faucet:

• Shut off the water supply to the shower. If the shower does not have a cut-off valve for that particular fixture, you will need to shut off the water supply to the entire house
• Open the faucets and allow the water to completely drain from the pipes. This will reduce or eliminate the chances of water splashing or pouring out while the repairs are being made
• Locate the screw on the faucet handle. Sometimes a clear or decorative cover has been placed over the screw housing. Use a flat-head screwdriver to gently pry this off
• Using the appropriate screwdriver, loosen the screw and remove the faucet handle
• Most leaks are caused by worn out or damaged rubber washers. If this is the case with your shower faucet, all that is needed is to replace the worn out or damaged washer with a new one
• If the washer does not need replacing, check to see if the faucet part itself needs to be tightened. If so, use the adjustable wrench to tighten the faucet
• Replace the handle, turn the water back on, and check to see if the leak has stopped. If it hasn't, make sure the washer is the right size, or try to tighten the faucet a little more
• If the faucet is broken, follow Steps 1-3, but completely remove all parts of the shower faucet. Take the parts to a store that sells plumbing supplies so that you will be sure to buy the correct replacement parts
• Install the new faucet. If there are no instructions included with the replacement parts, simply install the shower faucet where the old one was. The screw holes will already be there, and it will simply be a matter of fitting each part where it belongs, and attaching them firmly
• After the new faucet has been installed, follow Step 7

Package Included:

• 1 x Thermostatic Faucet