JYC TC-P1 Wired Timer Remote Controller

Specifications:

• Timer Delay: 0s to 99hrs 59min 59s in one-second increments
• Exposure Time: 0s to 99hrs 59min 59s in one-second increments
• Interval: 1s to 99hrs 59min 59s in one-second increments
• Number of Shots: 1 to 399,-- (unlimited)
• Power Source: Two AAA 1.5V LR03 alkaline batteries
• Battery Life: Approximately two months of continuous shooting with a delay of 5min, an exposure time of 4min 56s, and an interval of 5min. Use of the illuminator will reduce battery life
• Operating Temperature: -20 -- +50C (-4 -- +122F)
• Dimensions: Approximately 155 x 40 x 18 mm /6.1 x 1.6 x 0.7 in, excluding projections
• Length of Cord: Approximately 850mm (33.5in)z
• Compatible with: SONY a100/a200/A300/A350/a700,MINOLTA a7D/a5D DSLR or Film DSLR

 Features:

• Except for replicating all functions of a camera's shutter release button, it still has the function of Self-Timer, Interval Timer, Long-Exposure Timer and Exposure Count
• Good for time-lapse photography such as flowers blooming and astrophotography
• LCD panel can be illuminated
• Delay / Self Timer(DELAY)Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds
• Interval Timer(INTVL)The Wired Remote Control can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached
• BULB/Long ExposureLONG) Wired Remote Control allows you to take time exposures up to 100 hours long
• Exposure Count(N)This Wired Remote Control allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times

 Details:

• JYC TC-P1 Wired Timer Remote Controller 

• Timer Remote Control allows you to control camera shutter freely and conveniently

• Wired Remote Control gives you the flexibility to snap the shutter right when you need it, even if you're not behind the camera

How to Use Remote Capture on Camera:

• Install the software that comes with your camera. Most cameras built with USB interfaces come with the necessary software. For Canon DSLRs you use EOS Remote Capture, a feature included on the CD packed with the camera. However, if you have a Nikon you may need to purchase Nikon Capture or Capture NX2 separately
• Alternatively, download the software. Breeze Systems offers DSLR Remote Pro for Windows, which is downloadable software to support remote capture on most Canon DSLR cameras. For Nikon cameras, Breeze offers NKRemote, which is also software supporting remote capture. Breeze's products work only on Windows Vista, XP, 2000, ME or 98 SE. Canon Remote Capture X for Canons and Sofortbild (for Nikon cameras) can be used on any Mac running OS X 10.1, 10.2 or newer
• If using the camera's manufacturer's software, install all updates from their website
• Attach the camera to the computer using the USB cable that came with the camera
• Turn on the camera and start the remote capture. While most computers automatically detect the camera's presence and open the relevant remote capture tool for you, open it yourself and begin shooting photos from your computer

Guide to Check Infrared Remote:

• Remove the batteries from the infrared remote and replace them with new batteries
• Charge the digital camera's batteries so that it has a full charge
• Turn on the digital camera. Hold the digital camera in front of you with your left hand so that you are looking at the LCD screen on the camera's back
• Hold the infrared remote in your right hand so that the sensor at the front of the infrared remote is aimed at the lens on the front of the digital camera
• Press any button on the infrared remote with your right hand while looking at the LCD screen of the digital camera
• Look for a small white dot to appear and disappear in sync with pressing the button on the infrared remote. This is the light being emitted from the infrared sensor and means that the infrared remote is working

Tips & Warnings:

• A dirty IR sensor at the front of the remote can inhibit its working at its best. Lightly clean the IR sensor with a lint free cloth to remove dirt and dust
• Hitting the infrared remote against a hard object like a table top to try and get it working can break the IR sensor completely

Package Included:

• 1 x Timer Remote Controller