ShuangRong Portable 50m Underwater Monitor with CCD Camera System C1-008-01-ET-359

Specifications:

Monitor:

• Type: Digital TFT LCD
• Display Size: 3.5Inch
• Display Format: 4:3
• Power: ≤3W
• Power Supply: DC12V
• Video: 1 rearview video input/2AV input switch when reversing
• System: PAL/NTSC auto switch
• Contrast: 350:1
• Pixel: 480 x 234
• Installation: Install on the dashboard
• Operating Voltage: DC9V-16V
• Environment Humidity: 10%-90%
• Operating Temperature: -20℃~+60℃
• Storage Temperature: -40℃~+85℃
• Size: 104 x 103 x 25mm / 4.1 x 4.1 x 1.0in(L x W x H)

CCD Camera:

• Input Voltage: DC 12V
• Image Sensor: 1/4 inch SHARP color CCD
• Pixel Resolution: PAL: 500 x 582; NTSC: 512 x 492
• Electronic Shutter: 1/60~1/5000 Sec
• Lens Angular Field of View: 60 degree
• Effective Focal Length: 6mm, 9 Light
• Maximum Relative Aperture: F/2.0
• Resolution: 420 TV lines
• Video Signal Output: 1V(p-p) composite video signal at 75ohm termination
• Power Consumption: 1 Watt
• S/N Ratio: 40dB
• Cable Length: 50m/164ft

Features:

• The underwater camera system is designed to connect to your TV, VCR, LCD TV or some digital video camera/camcorders with an A/V input
• Have provided "Gender Adaptors" in the case that your digital video camera can not accept male RCA plugs
• The underwater camera system is ideal for use on your home TV or VCR (when using underwater camera in the pool) or can be used on TV's found on cruise or dive boats,Show children what goes on at the bottom of the sea, lake, fishpond or aquarium
• Look down wells and tanks or search dams, rivers and flooded mine shafts. Search sink holes, look down pipe or large drain holes for missing pets or children. Marine departments can check for damage, inspect boats or search for wrecks
• Farmers can use underwater camera to inspect the bottom of wells, tanks and dams
• Use the underwater camera system to check drains and pipes for root/branches/leaf clogs and blockages

Details:

• 50m underwater monitor, great for using to fishing, helps you to know the situation underwater well

• The portable underwater monitor features 3.5Inch TFT LCD, and with 480 x 234 pixel, provide you clear pictures

• High quality underwater camera system, durable and reliable for long time use

•  Come with a 50m long cable, which makes it more convenient to use the underwater camera system

• The underwater camera system is powered by DC12V battery, provides constant power supply

Size in Detail:

How to Clean an Underwater Camera:

• As you learn how to clean an underwater camera, make sure to inspect all cover doors regularly, including the ones for the battery and USB port. These should be free from debris and anything else which may allow water to leak into the underwater camera
• Remove any dirt or debris with a soft, lint free cloth. Take care to also remove any drops of water with the same type of cloth. This should be done both before and after each use
• Inspect visually all waterproof casings and seals, to make sure that there are no cracks or tears. Make sure that all doors close properly, and that the camera is not damaged in any way. If there is visible damage, do not use the camera underwater until the casings are replaced
• Fill the bucket with fresh water, making sure that it is free from any salt or other chemicals, as this could cause damage to the camera
• Close all doors on the camera, making sure that it is securely sealed. Immerse it into the bucket, with the lens facing downwards
• Open and close the lens cover a number of times, this is usually done by pressing the power button. This will make sure that any dirt or other obstructions are removed, preventing the lens cover from becoming stuck or damaged
• Remove the underwater camera from the bucket of water and gently shake off any excess liquid. Dry it using a clean cloth, then leave to air dry with all of the doors open. Now you know how to clean an underwater camera

Package Included:

• 1 x CCD Underwater Camera
• 1 x Underwater Monitor
• 1 x 6500mAh Battery
• 1 x Battery Charger
• 1 x 50m Cable