2.0 inch TFT LCD Screen Day&Night Dual Camera Vehicle Car DVR Recording

Specifications:

• LCD: 2.0 inch TFT LCD
• Lens: 120 wide angle
• Video Resolution: 1280 x 480
• Image Resolution: 2560 x 1920
• Video Format: AVI
• Image Format: JPG
• Memory: TF 512M-32G
• Language: English, Russian, Korea, Janpanese, Troditional Chinese, Simplified Chinese
• Current: 50HZ/60HZ
• Data Transfer Interface: USB 2.0

Features:

• This Vehicle Car DVR Recording has dual Lens, Surveillance the outside and inside together
• The surveillance camera comes with the nightvision function
• The surveillance camera comes with great effect
• The dummy security camera is a must for personal car
• The unique design of this surveillance camera is useful
• Front Lens with rotation wired camera, the surveillance camera is 180 degree
• This Vehicle Car DVR Recording has screen with rotation function, it can roll 270 degree
• 120 degree lens Auto-recording, This Vehicle Car DVR Recording can Cycle Recording

Details:

• 2.0 inch dummy security camera is useful in daily life, especially in car

• This car camera comes with clean image and portable design 

• The camera comes with night vision function which can work day and night

• Front Lens with rotation function. The driver can scan inside and outside together

• This camera comes with screen with 270 degree rotation function

• This Vehicle can cycle recording with 120 degree lens Auto-recording

How to Install Car Security Systems:

• Go to the local market where you get all the accessories for your car and look for car alarms. Car security alarms usually include parts like siren, motion sensors, universal lock, glass-break sensors, auto lock, etc
• Gather necessary materials like drill, screws and screwdrivers, duct tape, solder, testing bulb, etc
• Place the car alarm siren on top of a solid metal surface and then drill a hole to pass the wires coming out of the siren into the compartment area of the car.
• The next thing will be to power up the siren; this can be done by connecting the siren wires to the car battery
• Place a fuse on the power cable close to the battery. The size of the fuse may vary; refer to the installation manual
• Install the shock sensor as shown in the installation manual. The best place to install it can be under the dash. It will help in detecting the front and rear shocks equally
• Place the LED indicators on the dash by drilling a hole on it, passing the LED cables through the opening and putting the two-sided mounting tape at the backside of the indicator and then positioning on top of the hole created on the dash
• Install other security accessories such as auto lock, door lock, window lock, etc and then test the performance of the clock

How to Install a Camera on Your Car:

• Attach the display panel to the dashboard using the supplied hook and loop tape. The kit comes with an alcohol pad that you should use to wipe the spot you're attaching the tape. Don't skip this part--heat and vibration make cars an unforgiving environment for hook and loop tape, so the tape needs all the help it can get. Insert the power cable into the cigarette lighter receptacle
• Identify a convenient hole to run the cable between the camera and the interior of the car. The license plate frame light is a good call---you'll use the license plate bolts to hold the camera in place anyway. Run the wires into the car and along to the rear lighting housing
• Take the license plate bolts off the car and remove the license plate. Insert the bolts through the camera bolt holes, through the license plate and replace the bolts, along with the now-attached camera and license plates, onto the car
• Strip about 1/4 inch off the two cables that run into the reversing light. Make the incision in a convenient, easily accessible spot. Match the colors and wrap the ends of the camera cables around your new bare patches on the reversing light cables and seal with tape
• Test by placing the car in reverse and viewing the monitor

Package Included:

• 1 x Dual Camera Vehicle DVR with 2.0 inch TFT LCD Screen
• 1 x Bracket
• 1 x Car Charger
• 1 x USB Cable
• 1 x User Manual