New 8CH Network HDD Security CCTV Video DVR AYD-2408

Specifications:

• Adopt standard H.264 format. Compared with other video compression format, the recording bit rate is lower, the recorded picture quality is higher. It records longer and occupies lower bandwidth
• Support max 2 x SATA HDD, 1 x eSATA for backup. Utilize graphic user interface, beatiful and easy to navigate menus
• Support full mouse control through USB or PS/2 mouse, finishing all the setup and operation
• Support VGA output, display resolution adjustable. Connected to VGA display directly, getting more clear picture
• Support PTZ control with presets and auto cruise. 16 presets and 16 cruise tracks totally
• Support dual stream. Recording and network bit rate are adjustable respectively. Depending on the bandwidth, users can adjust the transmission bit rate, not affecting the recording picture quality and frame rate, which is advantageous to fit different users' bandwidth
• Support IE browser to remote view. Just download a small activeX file, not installing any software
• Support mobile surveillance by phones with WinCE and 3G
• Adopt standard FAT32 file system, compatible with computers. Users can check the files directly on the computer
• Support the third party software to play the recorded files, not installing any codec, Such as realplayer
• Support CMS software for multi devices central management( released approx 2-3 months later)
• Support multi-level user management. Administrator can manage the operating rights of other users
• Support event log. Users can check the earlier working status of the DVR by this
• Users can set all the parameters through network as you face the DVR, convenient to remote device management
• Network Protocol: TCP/IP, DHCP, DDNS, PPPoE
• Sophisticated Network Functions: Remote live view, remote playback, PTZ control and remote menu setup
• Pentaplex: Recording, playback, setup, backup and network surveillance simultaneously
• Various Recording Mode: Timer, motion detection, alarm. Recording picture quality, resolution&recording frame rate configurable
• Searching and Playback: Time, recording event (alarm, motion detection), recording list. Play back in full or 4 screens mode(4 screens mode pending)
• Backup: Download the recorded files by IE browser through network, external USB2.0 device and eSATA HDD, easy and fast to backup
• Compression Format: Standard H.264 Baseline
• Video Output: Composite: 1.0V p-p/75ohm, BNC×2 S-VIDEOX1, VGAX1
• Video Input: Composite: 1.0V p-p/75ohm, BNC×8
• Display Resolution: 704 x 576 (PAL), 640 x 480 (NTSC)
• Record Resolution: 352 x 288, 704 x 576 (PAL); 320 x 240, 640 x 480 (NTSC)
• Display Frame Rate: 200FPS (PAL), 240FPS (NTSC)
• Record Frame Rate: 200, 25FPS (PAL); 240, 30FPS (NTSC)
• Audio Input: 8dB to 22k, RCA x 8
• Audio Output: 8dB to 92dB, RCA x 1
• Alarm Input: 8CH
• Alarm Output: 4CH
• Record Mode: Manual / Sensor /Timer / Motion detection
• Simplex/Duplex/Triplex: Pentaplex
• Network Interface: RJ45 (LAN, INTERNET)
• PTZ Control: YES
• Communication Interface: RS485, USB2.0 x 2(one for backup, another for USB mouse), PS/2 x 1, eSATA x 1(for backup)
• Hard Disk Info: SATA x 2
• Remote Controller: YES
• Power Supply: 100-230V

Details:

How to Replace a DVR Hard Drive:

• Disconnect your DVR by unplugging any cables connected to it, including the power cable. Remove the screws located on the back of the unit that hold the top cover in place. There are usually two to six of these screws, depending on the model of DVR. Lay these screws in a safe place where they won't get lost, and slide the cover off
• Locate the hard drive. This is a rectangular metal unit that measures 3 1/2 inches wide. It is usually located away from the other hardware, often in its own bracket. There will be two to four screws holding it in place. Remove these, disconnect the cables connected to the drive, and slide it out of the system
• Check the label of the drive to see if it is IDE or SATA. It will say which one of the two interfaces it uses. Any replacement desktop hard drive of the same interface type will work in your DVR. Avoid using a laptop drive, because they won't fit and aren't designed for the high-stress environment of video streaming
• Place the new drive into the brackets, and replace the screws that were removed from the old one. Plug the data and power cables into this drive. They will insert the same way they came out of the old one. Once the drive has been installed, put the cover back on the DVR unit, and replace the screws. Hook the DVR back up to the television, and it will be ready to record

How to Copy From a DVR to an External Hard Drive:

• Install video software on your computer. To properly process your data transfer, you need video software, which you can get from computer and electronics retailers or online. Simple, easy-to-use programs can be downloaded for free. Use reputable sites, such as CNET.com, to find some of the more reputable free programs. More advanced programs, with sophisticated editing capabilities, will usually only be available for purchase
• Connect your computer and DVR. In order to copy programs to your external hard drive, you need to transfer them to your computer. For older systems, and especially for desktop computers, you will need to use use RCA connectors to connect the DVR to the computer. RCA connectors are color-coordinated audio-visual cables used to connect electronics components, such as stereos and receivers, and they can be used with some computers and DVRs as well. Plug the yellow ends of the cable into the video jacks on the machines, then plug the red and white ends into the audio jacks. If you have a newer system, use USB cables to connect the computer and DVR. With a TiVo DVR and a wireless home network, you can connect your components wirelessly if you download proprietary TiVo software
• Transfer the program to your computer. Choose the program you wish to transfer from your DVR then press "Play" while pressing "Record" on your computer software program. The program should transfer in real-time. Monitor the recording and, when finished, check for quality
• Copy the program to your external hard drive. Using the video software on your computer, select your external drive as the destination for your next copy. Select the copy you just made from the DVR and make another copy on your external hard drive. Again, monitor the transfer and check for quality when you are finished

Package Included:

• 1 x 8CH H.264 Real Time Security CCTV Network DVR
• 1 x Remote Controller
• 1 x Mouse
• 2 x Cables