2 Gang Red Floral Crystal Glass Panel Touch Wall Switch With Remote Control

Specifications:

Touch Switch

• Module: 0031087
• Size: 86.0 x 86.0 x 37.0mm/3.4 x 3.4 x 1.5in(L x W x H)
• Material: Red Crystal Glass Panel
• Operating Voltage: AC110V-250V/50Hz/60Hz
• Maximum Current for Each Gang: 5A
• Maximum Power for Each Gang: 1000W/220V or 600W/120V
• Self Consuming Power: Less than 0.1mW
• Operating Environment: -30-70 Centigrade; Less than 95%RH
• Lifelong: 100,000 Times of Operation
• Installation is as same as normal light switch, so does not require Negative line; Replace traditional wall switch completely and smoothly
• Using with all types of lights including Incandescent lamps, Halogen lamps, Fluorescent lamps, Energy saving lamps
• Note: The switch is not suitable for LED lamps or inductive ballast fluorescent, or any lamps with load power lower than 15W

Remote Control

• Size: 61.0 x 33.0 x 12.0mm/2.4 x 1.3 x 0.5in(L x W x H)
• Buttons: 4 keys (A, B, C, D)
• Control Lamps: 3 pcs
• Remote Distance: 20m
• Current: 15mA
• Frequency: 433.92 MHz
• Battery: 1 x 27A/12V battery (included, can be used for 12 months)
• Press key A, key B, key C, the corresponding lamp will be ON; press key D, all lamps will be OFF

Features:

• The fashion switch can make you feel very convenient in your home
• This kind of portable switch is very easy to operate and you can use it easily
• The design and the shape of portable switch will satisfy your requirement
• You can send the portable switch to your friend if he or she needs one
• The portable switch can be used for a long time because of its high quality material

Details:

• The fashion switch can be used for a long time because of its high quality material

• You can send the fashion switch to your friend if he or she needs one

• The fashion switch is a good choice for your busy lifestyle

How to Operation Touch Switch and Remote Control:

• Touch the control icon on the switch surface, turn on the lamp; Touch the icon again, turn off the lamp
• Register the remote: Press the effective touch zone of switch for 5 seconds; you will hear the sound of "Du". Then press key A, key B or key C. You will register successfully after you hear the sound of "Du"
• Cancel one registered remote: Press the effective touch zone of switch for 5 seconds; you will hear the sound of "Du". Then press key A, key B or key C. If this operation is successful, you can hear two continuum sounds of "Du"
• Cancel all registered remotes: Press the touch zone of switch for 10 seconds. You can hear the first sound of "Du" when it is in 5 seconds; and you can hear the second sound of "Du" when it is in 10 seconds, which means this operation is successful

NOTE:

• Press key D, all lamps will be off
• Each switch are capable of registering 8 remote control buttons, the first one will be canceled when you register the ninth one
• Two switches can not be registered at the same time
• Seconds interval is required for two times of remote control operation; otherwise the operation will be ignored
• This controller is only used for wood grain panel and crystal glass panel remote touch wall switches
• Each switch is capable of registering 8 remote control buttons

Warning:

• Please shut down power before installation and dismantlement
• Doing the Installation and dismantlement must be professional
• Check the circle condition before installation
• Pay an attention to the lamp introduction, since some lamps have special condition
• Dismantle the product to avoid ruin as the circuit is testing
• Avoid shock, wateriness, hot, and knocking when installing and using the product
• Forbid wet cloth, chemistry and scour water when cleaning
• Over loading is forbidden
• Circuitry which the products installed in should be set properly
• Do not use metal box for installation, it maybe shorten the distance of remote control or cause electric shock
• Mount box should be standard "86" style and the dimensions at least 75mmx75mmx35mm

Package Included:

• 1 x Touch Wall Switch
• 2 x Screws
• 1 x Remote Control
• 1 x User Manual