Waterproof Car DVR,Car black box with 1080P Wide Angle 5MP CMOS/ HDMI (2" LCD) with 8G Memory Card

Specifications:

• The great properties are the highlights of the car black box, which you can shoot in the dark
• This 1080P wide lens car DVR is your first choice for your loving car
• This car camera has clear and sharp screen providing full high-definition images
• Outstanding video resolution, superb low-light performance, and a wide dynamic range
• With a good quality of image, you're sure to capture the finest quality and detail in every moment
• Every feature of the car DVR provides the ultimate in 1080P video performance and quality

Details:

• With waterproof and wide angle properties, you're sure to capture the finest quality and detail in every moment

• The size of the car DVR is neither too big nor small, which is easy to place and install

• 1080p HDMI true-to-life, vibrant colors and astonishing high definition images like you've never seen, right in the palm of your hand

• Outstanding video resolution, superb low-light performance, and a wide dynamic range

• You can easily make this car DVR like a terrific transformer on your car

• This waterproof 1080P wide angle lens car DVR is your first choice for your loving car

Please follow below instructions
whiling using the CAMCORDER:

How to Build a Car Camera Mount:



Shooting stable video from inside a moving car is very difficult without some sort of camera mount. Professional car mounts sold by grip equipment houses and professional camera stores can easily cost more than $1,000, and are out of the price range of many independent filmmakers and amateur photographers. Using some basic hardware and a little ingenuity, however, you can make your own car camera mount that should be able to hold most small and medium-sized cameras. With this mount, you can station a camera in the rear of the cab, pointing it out to the front windshield and driver

• Drill a 3/8-inch between the edge and the center hole of a metal electrical plate. This will be used to mount the ball head to the plate
• Pass the 3/8-inch bolt (with 16 threads per inch) through the hole you just drilled and hold it into place using a nut
• Place the two wide washers on either side of the metal plate over the center hole, sandwiching the smaller washer from underneath the plate
• Remove the bolt that will hold a child safety seat from the back seat of the car. Remove the plastic housing surrounding the bolt, and bolt the metal plate in its place
• Screw the ball head into the 3/8-inch 16 bolt and then level and attach a camera

How to Mount a Camera on a car for Filming:

Mounting a camera in a car to film time at the track, street races or motion pictures is a tricky project. Mounts are available in many forms and designed to work in different environments. Knowing where and how to mount a camera on the car requires careful consideration and the right tools

• Find the right mount for the job and the camera you use. Handheld camera mounts are available in suction cup and hard mount designs while large motion cameras require heavy-duty mounts that install inside or outside of the car
• Determine the best position for the mount based on the application. For track footage, dash or between the front seats mounting is preferred. Over the shoulder mounting allows the camera to capture the cars gauges for performance evaluation
• Set up suction cup mounts on the windshield or dash. Ensure the surface is clean before applying the suction cup and test stability between shoots
• Drill holes for a hard mount per the manufacturers instructions by locating a stiff surface that won't bend or flex under the weight of the camera. Dashboards and consoles make good mounting locations. Secure the mount with the provided hardware and adjust the camera as desired
• Install motion picture cameras on metal supported areas of the car. Remove any molding or covers from the inside of the car before drilling to uncover any hidden obstacles. Drill the holes through the roof, doors or other mounting location and assemble the supports
• Tighten the bolts on the camera-mounting frame and test to verify there is no flex in the metal. Connect any extensions and finally place the camera into the mount
• Test the camera position and any motorized controls before shooting. Adjust shooting angles and verify the camera is secure

Package Included:

• 1 x DVR
• 1 x Charger
• 1 x HDMI Connecting Wire
• 1 x USB Connecting Line
• 1 x CD
• 1 x Wrist Strap
• 1 x Instruction Book