Specifications:
- Output Voltage: 220V±10%
- Input Voltage: 12V
- Output Frequency: 60HZ ±2Hz
- Power Rating: 400VA
- Max.Power: 800VA
- Max Efficiency: >89%
- Lower Voltage Stop: 10V±0.5V
- Over Voltage Stop: 15V±0.5V
- Protect Temperature: 50°C ± 20%
- Output Wave: Corrected sine wave
- Size: 152 x 89 x 47mm / 6.0 x 3.4 x 1.9in
Features:
- Heavy duty but small, quiet and convenient
- Auto alarm warns of low battery level prior to auto shut down
- The output of the product is a universal socket, which can be used in many countries
- Car USB power inverter with USB port that can connect to portable computer, mobile telephone, camera, mini-hifi, daylight lamp etc
- Use along with insert, suitable for all kinds of cars
- Car power inverter can change the DC 12V into AC 220V output
- 220V power inverter adapter can be widely used in all kinds of electrical apparatus, which voltage rating are AC 220V and frequency are equal to 50Hz, such as mobile telephone, portable computer, electric light, digital camera, TV and so on
- 500W car inverter charger can be made from advanced PWM CMOS chip
- Charger adapter can work in the state of ultrasonic sound, which can both in a great extent minish the bulk and weight and make the circuit work without noise
- DC adapter can protect the electric circuit in a great degree
- The newly-added USB output socket can be directly used to charge for MP3 and mobile phone
- Built-in a fan for cooling
- On/Off switch control the fan
Details:
- The output of the USB car power inverter is a universal socket, which can be used in many countries
The multifunctional car power inverter uses along with insert, suitable for all kinds of cars
- Made of high quality material, the multifunctional car power inverter is durable and reliable for long time use
Size in Detail:
How to Install a Car Power Inverter:
- Park the vehicle and open the hood. Disconnect the battery by loosening the positive cable with a wrench and pulling it free with your hand
- Mount the power inverter. Pick a location which will allow plenty of air flow around the inverter as they heat up when used. A typical mounting location is on the lower kick panel in the passenger side of the vehicle under the dash
- Wire the inverter. Run a length of wire from the positive side of the inverter to the car's battery by running the wire through a grommet in the firewall
- Connect the wires. Connect the new positive and negative wires to the wires coming from the inverter to the wires you installed into the vehicle by placing terminal ends on the wires and crimping them in place in the same manner as the positive wire at the battery
Package Included:
- 1 x Car Power Inverter Charger
- 1 x Power Cable with Clip
