Specifications:
- Charge two pieces of 18650 cylinderical lthium battery simultaneously with this 18650 Battery Charger
- Cost effective, high efficiency and reliability for this 18650 Battery Charger
- This 18650 Battery Charger is with constant current and voltage (CC, CV mode)
- Built in over voltage, over current and short circuit protection for this 18650 Charger
- With small body design, this Li Battery Charger is portable and you can take it with you wherever you go
- Input Voltage: AC100-240V 50/60Hz
- Output Voltage: DC4.2V
- Charging Current: 500mA
Details:
- Charge two pieces of 18650 cylinderical lthium battery simultaneously, it is quick and convenient to recharge the batteries
- Perfect fitting and 100% satisfaction guaranteed! It is very convenient to use with high quality and performance
- More details for this battery charger, you can easily put this jack into the socket and then charge your batteries
- With good design and made of good material, this Li Battery Charger is with good quality and durable with long time use
- With small body design, this 18650 Battery Charger is portable and you can take it with you wherever you go
How to Replace an AA Battery Ion LI Rechargeable:
Lithium ion (Li-Ion) rechargeable AA-size batteries are about 40 percent lighter than regular alkaline non-rechargeable batteries and produce nearly three times the voltage; 3.6 volts compared to 1.5 volts. An additional benefit is they don't suffer from power loss like nickel-based batteries can, but Li-Ion batteries need to be recharged correctly using a lithium charger as incorrectly charging or over charging, can result in the battery getting damage and may be potentially dangerous. Replacing an AA-size Li-Ion rechargeable battery is no different to replacing a regular AA battery.
Instructions:
- Open the AA-sized battery panel on your device so you can remove the existing Li-Ion battery. Battery panels can open several ways; either release the clip using your fingers so the panel pops up then flip it open or slide the panel to one side using your fingers. If the panel is held in place by a small screw, then use a suitably-sized screwdriver to undo the screw then them remove the panel using your fingers
- Remove the Li-Ion battery from the battery compartment. If the battery fits into a tube it's simplest to turn your device upside down using your hand to cover the battery compartment, then the battery slides out into your hand. If the battery lays flat in the battery compartment, then pry out one end from the terminal connector using your fingers and then lift out the battery
- Put your replacement AA-size Li-Ion battery into the battery compartment. Look on the inside of the battery cover or the battery compartment to work out which way the positive and negative terminals need to go. Slide the battery into the tube or if it goes in flat, lay one end against one of the terminals in the battery compartment and press down on the opposite end using your fingers until it clicks into place
- Replace the battery panel. Either flip it closed, then press the edge so it clicks shut or slide the panel into place. If the panel is held in place using a screw then use the screwdriver to tighten the screw
Package Included:
- 1 x 500mA Li-ion Battery Double Rechargeable Charger for 18650 Battery
