Specification:
- Screen Dimensions: 7 inches
- Display Component: color TFT-LCD
- Number of Dots: 480 x 24 (RGB)
- Resolution: 960 x 234
- Aspect Ratio: 16:9
- Contrast Ratio: 400:1
- Response Time: B→W 30ms W→B 10ms
- Viewing Angle: (U/D/L/R) 65°50°65°50°
- Video Frequency: PAL/NTSC
- Receivable Channels: VHF-L: CH1-T 49.75MHZ-91.75MHZ, VHF-H: CH6-12 168.25MHZ- 222.75MHZ, VHF: CH13-75 471.25MHZ-869.75MHZ
- Cable Channels: Z1-Z7: (112.25MHZ-166.75MHZ), Z8-Z35: (224.25MHZ-446.75MHZ)
- Audio Output: 1W (Max)
- Power Supply: Automobile storage battery (12V) automobile Adapter
- Power Consumption: Around 8W
Camera:
- Image Sensor: color CCD CMOS
- TV System: PA / NTSC
- Horizontal Resolution: 420 TVL
- Effective Pixels: PAL: 512 x 582, NTSC: 512 x 492, OV7949: 628 x 586(PAL), PC 1030 PAL/NTSC: 640 x 480
- Sensing Area: 1/3: 4.9mm x 3.7mm, 1/4: 3.6mm x 2.7mm, , OV7949: 5.961 x 4.276mm, PC 1030 PAL/NTSC: 3.5964 x 2.7084
- Min Illumination: 1.0 Lux/F1.2. (0 Lux whth IR on), 0.5 Lux(0 Lux with IR on)
- Diagonal Viewing Angle: 120°C, 170°C (optional)
- Night Vision: 0, 3-5m, 5-10m, 10-15m (optional)
- Video Output: RCA connector 1.0Vp-p.75ohm
- Current Consumption: 50~60mA, Max 300mA with IR on
- Power Supply: DC 12V
- Operating Temperature: -20°C~+60°C, RH95%MAX
- Storage Temperature: -40°C~+80°C, RH95%MAX
Features:
- This is a kind of rear view camera system with ultra broad-angle digital TFTLCD TV and digital photo frame
- This car LCD monitor with TV technical design, which can show exquisite & clear image and no radiation
- Multi picture mode choice: a. 16:9 screen size mode. b. 16:9 enlarged screen size mode. c. 4:3 screen size mode. d. Horizontal picture version. e. Vertical picture version
- Inset super powerful reception
- ALL supplement channels receipt, with 160 preset channels
- Chinese-English menu changeable and blue background display
- TV Calendar displays year, month and date
- Timed auto turn on and off
- All-function remote controller
- Multi-system choice for the customer, such as PAL, NTSC
- AV input
- Earphone output jack
- Can be powered by AC or DC 12V automobile storage Battery
- Automatically turning system
Details:
- This car LCD monitor screen that is mounted on your dashboard displaying the camera's video feed
- This car LCD monitor provides all the cables and car reverse camera which you need, which is easy to use
- This holder is made of good material and durable to use a long time for car owners
- With car power adaptor, it can be charged anytime
- With this remote control, you can operate this system easily and effortless
- Equipped with anything you need, you can install the rear view system quickly as soon as you get them
Caution:
- Do not try to repair the device by yourself. If there is any problem. Please switch off the television immediately and then inform our company or our dealers. This television is comprised of many precision electronic components. Disassembling or self renovation may damage it or make a break
- Do not expose the television to the moisture, dust, oil smog, direct sunshine or environment affections
- Do not use diluents or other chemical detergents. Use soft cloth to remove dust or dirt on the television
- Keep the television away from over hot or over cold locations. The television's operation temperature range is 0°C-40°C. The television's storage temperature range is -20°C-60°C
- Use the AC adapter, battery pack and auto mobile adapter that come with television only
- For safety purpose, when you do not use the television, remove the AC adapter or automobile adapter
- Avoid dropping or impact to the television
Special Caution:
- We strongly recommend have qualified technician or maintenance engineer install this device
- If this LCD TV does not work well, check the connection first. Then the fuse if it the connection is ok
- Improper installation of this LCD TV may cause battery leakage or short circuit
- When environment temperature declines dramatically, dew may occur inside the LCD car TV, user needs wait for a minute till the moisture evaporates, then the device will return to good condition
- If you park your car in an extremely cold or hot place, the video may become unclear is not a fault. When the temperature in car returns to normal level, the video will become clear
How to Install a Rear-View Camera in Your Car:
Rear-view cameras are especially useful in tight parking lots, dark areas or in places where children might be running around. You can install as many of these cameras as you want, though one or two is usually enough
Instructions:
- Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
- Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
- Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
- Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
- Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
- Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
- Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you
Tips & Warnings:
- Don't rely solely on the rear-view camera when backing up. Use it as a supplementary aid
- You must have the rear-view monitor set up and installed correctly to receive the video signal from the rear-view camera
- Don't install the camera (or any electrical device) with the battery connected, or you'll risk a severe electric shock
How to Connect a Rear View Camera:
- Remove the plastic or carpet panel on the inside of the trunk behind the license plate and below the trunk lid. If your vehicle is an SUV (sport utility vehicle) or something similar, expose the innards inside the tailgate
- Mount the camera. Remove the two license plate bolts and insert them through the camera bolt holes and back onto the car. Use the license plate light hole to push the wiring through to the trunk
- Run the red and white cable from the camera you have mounted on the license plate frame to a reversing light housing inside the vehicle. The license plate light can provide a convenient hole, or simply drill a new hole and weatherize it with a grommet
- Trim and strip 1/4 inch of plastic sheathing off the end of the wire at the reversing light housing
- Identify the vehicle wires that provide power to the reversing lights. Identify them by tracing the wiring back from the reversing light bulb connector. Strip 1/4- inch of plastic sheathing off the wire. This should be at a convenient, easy to reach location--the middle is fine. Wrap the camera wires around the reversing light wires, match red to red and black to black. Seal with electrical tape
- Attach the display monitor to a convenient position on the dashboard. Use the included hook and loop tape. Plug the power supply from the display monitor into the cigarette lighter plug on the vehicle's dashboard
- Test and then replace the plastic or carpet panel
Package Included:
- 1 x HN-778F 7'' LCD Car Rearview Mirror Monitor
- 1 x AC Power Adaptor
- 1 x Car Power Adaptor
- 1 x Earphone
- 1 x Base Support
- 1 x Bracket
- 1 x AV Convert Line
- 1 x VGA Cable
- 1 x Antenna Convert Cable
- 1 x Remote Controller
- 1 x User Manual
