Specifications:
- Operating Voltage: DC12V
- Operating Current: 220mA
- Operating Temp: -10℃～+50℃
- Current Output: 1000mA
- Voltage Output: DC12V
- Standard Capability: 1GB KingSton Hi-Speed SD Card
- Maximum Capability: 2 GB SD Card
- Photo Format: JPEG
- Photo Pixel: 640 x 480
- Video Format: AVI
- Record Pixel: 320 x 240
- FPS: 8FPS
- Video Record Time: 10s/pc
- Compress Format: Motion JPEG
- Record Signal: Video
- Video Input: 75Ω Typ.1vp-p
- Video Output: 75Ω Typ.1vp-p
Features:
- Immediately getting into the work state of "Detect motion object" after power on
- Automatically take photos/record Immediately when detect the movtive objects
- If the object is immobile or the object stops moving, PVR does not record or stop recording
- Provide itself 1GB SD card which could store about 7200 photos or 1212 video clips
- The Mini DVR uses a 2 GB SD card to store about 28800 photos/4850 video clips
- Adopt DC12V which is widely used, safe and save electricity
- Supply DC12V directly to the CCD/CMOS camera
- With port of "outside triggers shooting/recording"
- With port of "detect signal output"
- Memorize the set parameter and it won't be lost when power off
- The stored photos/video clips will not be lost when power off
- Choose 12V/1800mAh special rechargeable li-ion battery
- Choose special mini CCD/CMOS camera
- The Mini DVR supports alarm system/video doorphone system connection
- Support the video signal of NTSC/PAL
- The recording date as file name, the format of picture is JPEG, and the format of video is AVI
- Lookup the photo or video by the record date (time)
- No need to install the software, operate simply and you can use the video recorder once you turn on it
- Lock button
- Support playback the image on TV/monitor/computer
- The basic function of the PVR (pocket Digital Motion Detect Video Recorder) can be summarized: PVR=CCTV+DVR. i. e. the PVR can shoot and record automatically/manually once moving object appears and saves the image in the SD card. Besides, the user can look through the images on TV (monitor) or computer (need to install a SD reader) at any moment and can save the images in the computer
- The Mini DVR can be integrated or removed freely: Press the lock button on the mask and pull the camera towards the right side, and then the camera can be removed
- This HD Digital Video Recorder is a cost-effective solution to replace commercial VCR tape recorder by this item
Details:
- Mini Digital Video Recorder with 1GB SD Card
- Accessories included
- This Mini Digital Video Recorder is a cost-effective solution to replace commercial VCR tape recorder by this item
Item Includes:
- The Pocket Digital Motion Detect Video Recorder (PVR)is a new style and high intellective digital motion pattern recognition video recorder system
- The Pocket Digital Motion Detect Video Recorder (PVR)is a new style and high intellective digital motion pattern recognition video recorder system
- It also can replace the alarm system, so it is a popular DVR
How to Replace a DVR Hard Drive:
- Disconnect your DVR by unplugging any cables connected to it, including the power cable. Remove the screws located on the back of the unit that hold the top cover in place. There are usually two to six of these screws, depending on the model of DVR. Lay these screws in a safe place where they won't get lost, and slide the cover off
- Locate the hard drive. This is a rectangular metal unit that measures 3 1/2 inches wide. It is usually located away from the other hardware, often in its own bracket. There will be two to four screws holding it in place. Remove these, disconnect the cables connected to the drive, and slide it out of the system
- Check the label of the drive to see if it is IDE or SATA. It will say which one of the two interfaces it uses. Any replacement desktop hard drive of the same interface type will work in your DVR. Avoid using a laptop drive, because they won't fit and aren't designed for the high-stress environment of video streaming
- Place the new drive into the brackets, and replace the screws that were removed from the old one. Plug the data and power cables into this drive. They will insert the same way they came out of the old one. Once the drive has been installed, put the cover back on the DVR unit, and replace the screws. Hook the DVR back up to the television, and it will be ready to record
How to Copy From a DVR to an External Hard Drive:
- Install video software on your computer. To properly process your data transfer, you need video software, which you can get from computer and electronics retailers or online. Simple, easy-to-use programs can be downloaded for free. Use reputable sites, such as CNET.com, to find some of the more reputable free programs. More advanced programs, with sophisticated editing capabilities, will usually only be available for purchase
- Connect your computer and DVR. In order to copy programs to your external hard drive, you need to transfer them to your computer. For older systems, and especially for desktop computers, you will need to use use RCA connectors to connect the DVR to the computer. RCA connectors are color-coordinated audio-visual cables used to connect electronics components, such as stereos and receivers, and they can be used with some computers and DVRs as well. Plug the yellow ends of the cable into the video jacks on the machines, then plug the red and white ends into the audio jacks. If you have a newer system, use USB cables to connect the computer and DVR. With a TiVo DVR and a wireless home network, you can connect your components wirelessly if you download proprietary TiVo software
- Transfer the program to your computer. Choose the program you wish to transfer from your DVR then press "Play" while pressing "Record" on your computer software program. The program should transfer in real-time. Monitor the recording and, when finished, check for quality
- Copy the program to your external hard drive. Using the video software on your computer, select your external drive as the destination for your next copy. Select the copy you just made from the DVR and make another copy on your external hard drive. Again, monitor the transfer and check for quality when you are finished
Package Included:
- 1 x Digital Motion Detect Camera Server
- 1 x 1GB KingSton Hi-Speed SD Card
- 1 x Special Power-Video Combines Wire
- 1 x Special Power Supply Commutator Wire
- 1 x Special Video-Out Wire
- 1 x Special Signal Control Wire
- 1 x Power Supply
- 1 x Manual
