Specifications:
- This O-flash macro flash unit is a unique adapter for your hot-shoe flash unit designed to replicate the lighting effect produced by traditional, expensive, and heavy powered studio ring flash units
- The most best tools for macro photography
- Macro O Flash Ring is portable and lightweight, has been designed to take advantage of a camera's TTL metering capabilities
- Because this flash relies on the hot-shoe flash to generate its light, it contains no electronics, no flash tubes and requires no cumbersome cables
- This is a non-OEM product
- Size: 290 x 175 x 85mm/11.4 x 6.9 x 3.3in(L x W x H)
- Compatible with: Nikon SB800 with D70 / D300 / D200, Nikon SB600 with D1 / D2 / D3 / D3/ D700, Canon 580EX XSI XS XTI T1I / 580EXII with digital rebel XT / XTi 500D / 300D / 350D / 400D / 450D / 1000D
Details:
- This is a Macro O Flash Ring of 100% brand new and high quality.The Macro O Flash Ring contains no electronics,no flash tubes and requires no cumbersome cables
- The Macro flash ring is portable and lightweight,has been designed to take advantage of a camera's TTL metering capabilities
- This Canon flash ring allows infrared AF assist beam pass through the flash ring .TTL functions will work normally when using this O-Flash.As with standard flash use,manual exposure control requires the use of a light meter or test-shots
Size in Detail:
How to Use the Canon Macro Ring Flash:
Macro flash rings are used for macro, or close-up, photography. Regular flash units produce shadows because they deliver the light from one direction. Ring flashes have a circular flash unit that produces shadowless images. Canon macro ring flashes have two parts. The control unit attaches to the camera's shoe-mount, usually found on the top of the camera body. The ring flash mounts on the camera lens. A cord connects the two parts and allows the camera to "talk" to the flash
- Install four "AA" alkaline or nickel-hydride batteries in the control unit battery compartment. Magnesium batteries may also be used but they will not power as many flashes as the other battery types
- Loosen the locking collar on the control unit by turning it left to right. The locking collar looks like a wheel on the bottom of the control unit
- Slide the control unit's mounting foot all the way into the camera's hot shoe.
- Tighten the locking collar right to left
- Attach the flash ring to the macro lens by pressing the release buttons on each side of the flash ring. Release the buttons to make sure the flash ring is attached to the lens
- Turn on the power to the control unit
- Allow the pilot lamp light on the back of the control unit to illuminate. Press the pilot lamp button to test-fire the flash
- Press the mode button on the control unit to select either E-TTL (automatic) or M (manual) flash. If E-TTL is chosen, set the camera mode dial to P (program, where the camera sets flash aperture and shutter speed) or AE (aperture priority, where photographer sets the camera's aperture and the camera sets the shutter speed)
- Press the ratio button on the control unit to change the ratio between the left light bar and right light bar. Ratio on the top line should be highlighted. Press the left triangle button or the right triangle button to change the ratio. Available ratio ranges from 1:8 (the right tube will give off more light than the left) to 8:1
- Take the picture
Warnings:
- Remove the batteries between uses
- Replace all of the batteries at once
- If it is cold, take an extra set of batteries. Keep the extra set warm by storing in a pocket. Cold can deplete the strength of a battery
Package Included:
- 1 x Macro O-Flash Ring Adapter for Canon 580EX XSI XS XTI T1I
