Specifications:
- This ink cartridge set is designed specially for EPSON stylus C67/C87
- The printer ink cartridge is designed with absolute structure, peculiar appearance and excellent quality
- The paries of the ink cartridge set is well polished so that it is waterproof and keeps clean
- You can use this ink cartridge set again and again and never need to get another inkjet printer ink cartridge
- It is quite easy for you to install this ink cartridge set
- This is a NON-OEM product
- Compatible with: EPSON Stylus C67/C87
- Size: 11.0 x 10.8 x 6.0cm/4.3 x 4.3 x 2.4in(L x W x H)
- Cable Length: 70.0cm/27.6in
Details:
- This brand new ink cartridge set can provide a top quality alternative to the original printer ink cartridge range
- Made of high quality material, this printer ink cartridge is not inclined to be calorific and durable enough
- Designed to be humanized, this printer ink cartridge is much easier to install
- Paries is polished so that it will not absorb any ink and water
- Ducts of the ink cartridge set is flexional and will not be blocked easily
How to Change Cartridges on an Ink-Jet Printer?
- Purchase an ink cartridge made specifically for your printer
- Turn on your printer and raise the lid or press the cartridge changing button
- Wait for the cartridge carrier to slide out
- Put your finger behind the ridge on the top front of the old cartridge and pull it toward you to remove. If you have an Epson printer, lift the cartridge holder lid, and the cartridge will pop up for removal
- Carefully remove the tape from the ink opening on the bottom of new cartridge
- Insert the new cartridge into the cartridge carrier. Make sure the new cartridge is oriented the same way that the old cartridge had been
- Feel and hear the cartridge click into position. On some models, arrows will indicate the cartridge is correctly positioned
- If you have an Epson printer, close the cartridge holder lid and press the cleaning button to charge the cartridge
- Close printer cover
How to Put Ink in Printer Cartridges:
Getting ink cartridges for your printer is one of the most expensive things about owning and maintaining a computer. It seems that the replacement ink cartridges often cost more than the original printer. One way to save a little money is by refilling the ink cartridges yourself. Many companies are now offering do-it-yourself printer ink kits which cost much less than new cartridges. Putting the ink into the cartridges isn't that hard, you will just need a little patience and these few easy steps
Instructions:
- Spread the newspapers over your entire work area. Place the paper towels within close reach. Put the used ink cartridge upright on the newspapers and open the ink refill kit
- Drill a hole in the recessed area on the top of the ink cartridge, if there isn't one already there. If the cartridge has a refill hole, remove the tape that covers it
- Fill the syringe with ink from the kit. Usually its 10 mil for black ink and about 5 to 8 cc for colored ink
- Insert the syringe needle into the hole on top of the cartridge and with firm pressure slowly fill the cartridge with ink
- Seal the hole with tape
- Place any unused ink back into the bottle for later use
- Wipe off the ink cartridge and place it back into the printer
- Leave the ink cartridge in the printer for at least 24 hours before using. This allows the sponge inside the cartridge to become evenly saturated with the ink
Package Included:
