Specifications:
- The transmitter emits radio signal to the receiver when shutter is pressed, the receiver once picks up the signal, will trigger off the external flash unit
- This Camera Flash Trigger has strong anti-interference function and has 4 channels for you to choose
- This Flash Trigger Kit is extremely useful if there are several photographers working nearby
- This Flash Trigger is only for the cameras with universal hot-shoe, MINOLTA and SONY can work with converter(not included)
- Compatible with: Nikon SB-900, SB-800, SB-600, SB-80DX, SB-28 SB-27, SB-26, SB-25, SB-24; Canon 580EX, 430EX, 580EXII, 430EX11, 420EX, 420EZ, 380EX, 540EZ, 520EZ, 430EZ; YIYAN CY-20, BY-28A BY-24ZP, CY-28A, BY-26AL, CY-32TWZ, BY-18, not for CY-28ZL, CY-26ZL; SUNPAK PZ42ZX, PZ40X, not for PF30X; EMOBLITZ D730AFC, D35AFC, D728AFC, D728AFN, D730AFN, D35AFN; SZ-1000 SG-300 SG-100; YN-460, YN-462, YN-465, YN-460 II, etc.
- Powered by: 2 x AAA batteries
- Channel: 16
- Outdoor Working Distance: Approx. 20~30m
- Indoor Working Distance: Approx. 20m
- Synchronizing Speed: 1/200 second
- Size: 70 x 60 x 45mm / 2.8 x 2.4 x 1.8in(L x W x H)
Details:
- The transmitter emits radio signal to the receiver when shutter is pressed, the receiver once picks up the signal, will trigger off the external flash unit
- The flash trigger unit has strong anti-interference function and has 4 channels for you to choose
- Only for the cameras with universal hot-shoe, MINOLTA and SONY can work with converter (not included)
User Guide:
- Insert the transmitter to camera hot mount directly w/screw lock system. Turn on the camera and transmitter and set in same channel
- Attach the camera flashes to receiver hot mount (1) and (2)
- Place the umbrella shaft into the socket
- Press the camera shutter ready for instant using
How to Trigger Flashes on Professional Cameras:
- Assess the scene to determine what kind of flash will be appropriate to use. The type of flash means how big the flash needs to be and how far from the camera you want it. There is a link to a helpful table below. Another factor for your flash will be your ability to use camera equipment such as a tripod or an umbrella stand
- Lock the flash directly into the flash port of your camera. This technique is for the highest amount of mobility and is probably the easiest flash set up to pull off. All you need is you camera and the flash. When you take the picture, the flash will automatically trigger
- Attach a bracket to your camera to give your flash a little more height and distance from the lens. This technique has its advantages, but it also requires more equipment such as the bracket itself and a short cord that will attach the flash to the flash port on your camera. The flash will deploy automatically when you take the picture
- Hook the flash to your camera with a much longer cord and mount the flash independently. As you venture into more professional looking photos, the brightness and distance of the flash is going to vary depending on your subject. This technique will require a separate stand for your flash, a much longer cord to connect to your camera, and a tripod to stabilize the camera itself. Once again, the flash will automatically fire when you take the picture
- Connect your flash to the camera via a wireless system. This is essentially another variation of step four, only there are no cords involved to trip people up or to prohibit flash placement. This is good for high traffic areas or shoots with particularly odd environments. These wireless systems can be bought for various prices which may determine the quality of their performance
Package Included:
- 1 x Transmitter
- 1 x Receiver
- 1 x Cable
- 1 x User Manual
