Customers Also Bought
- Self-locking: Connect JP1 with shorting plug
- Non-locking: Disconnect JP1 and JP2 with shorting plug
- Interlocking: Connect JP2 with shorting plug
- 2 Channel Interlocking 2 Channel Inching: Connect both JP1 and JP2 with shorting plug
Learning and Clear Procedures:
- Learning Procedures: 1, Press the learning key, the LED lights. 2, Press any key on the remote, the LED flashes twice then turns off, indicating learning successfully
- Clear Procedures: Press learning key for 8 seconds, the LED from on to off, indicating clear successfully
- This 4CH relay module could be complemented with 12V 4 channel multi-function remote control switch, 220V 4 channel remote control switch and 86 remote control switches
- 4 channel wireless intelligence receiver controller with 4 relays may enable the equipment to control electric motors and switches, also could meet any other special request
- This 4CH relay module characterized as stable performance, small size and high receiver sensitivity
- The multifunctional relay module is mainly used in the field of industrial control and security surveillance
- The 4CH relay module could be complemented with remote controls to form a complete wireless intelligence control system
- The controller could be compatible with chips such as 2262/2260/1527/2240
- Home and Store alarm System; Electric motor car, automobile, motorcycle alarm device, each kind of windows and doors controller and other industrial control
Multifunctional Automatic to Code Relay Module:
- Working Voltage: DC12V
- Static Current: ≤ 6mA
- Working Temperature: -40 ℃ ~ +80 ℃
- Receiver Sensitivity: ≥-105dBm
- Working Frequency: 315/433MHz (optional)
- Output Voltage: AC and DC optional
- Output Current: ≤ 3A
- Size: 72 x 52 x 26mm / 2.8 x 2.0 x 1.0in (L x W x H)
- The wireless relay module is made of high quality material, adopts high technology, durable and reliable
- Working Voltage: DC12V
- Working Current: ≤12mA
- Operating Frequency: 315MHz, 433.92MHz frequency, etc. optional
- Transmit Power: ≥ 10mW
- Emission Distance: 100 meters (open)
- Frequency Deviation: ± 0.2MHz
- Transmission Speed: 50 ~ 60KHZ
- Size: 55 x 30 x 13mm / 2.2 x 1.2 x 0.5in (L x W x H)
- Looks pretty decent
- Internal circuit design science
- Using SMT chip components
- SAW resonator frequency stabilization
- High stability, low power consumption
- The Universal Remote Control features 4 botton, easy to operate, convenient to use
How to Reset a Remote Control:
If you want to add another remote control for your garage door opener or need to replace a dead battery and reprogram an existing remote, chances are you'll have to reset the opener with the base unit for it to work. The process involves just a few steps and is relatively easy to do
- Replace the battery by opening the remote, taking out the old one(s) and putting in the new one(s). Make sure you buy the right battery for your remote. Match the battery type, size and voltage that came with the remote
- Use a step ladder to access the garage door motorized unit, usually equipped with a safety light. Locate the reset or "learn" button on the unit. Many times, this small button is recessed, so you might need a pen or pencil to reach it
- Push the reset or "learn" button on the opener. While the reset indicator light is blinking for about 30 seconds, point your remote at the opener, then press and hold the remote button that opens the door, and the reset light should stop blinking and glow steady to indicate the controller and opener are now synchronized. If the process doesn't work the first time, try again to make sure you pressed your button during the time when the indicator light is blinking
- 1 x Wireless 4 Channels Multifunctional Automatic to Code Relay Module
- 3 x Four Buttons Universal Remote Controls
If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Before that, please contact our Live Support to inform that.
In that case we will refund you the payment excluding actual shipping fees already incurred.
If the item is defective, please contact DinoDirect Live Support and send an email to us at firstname.lastname@example.org attached an image or video file clearly showing the defect of the product. And we will give you a response within 24 hours whether we will resend the item or refund the payment to you for compensation.
For customization, please consider carefully before ordering.Because we do not accept return and replacement.
|Unit Price||USD$ 10.81||USD$ 10.48||USD$ 10.15||USD$ 9.71|
|Enter Wholesale Channel>>|
• If the order has not been shipped; please contact DinoDirect Live Support for order cancellation.You will get your refund within 24 hours.
• If the order has already been shipped; you may return the item to us postmarked within 30 calendar days of delivery. Please contact our Live Support to inform that.
• Please contact Live Chat or click here to learn more return policy.